Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
overview | archive | article
Updated Atmel XMEGA AVR - PDI Programming Support for production

Equinox Technologies are pleased to announce updated high-speed In-System Programming (ISP) support for the Atmel XMEGA AVR microcontroller family on our range of 'ISPnano Series 3' production ISP programmers. The XMEGA devices are programmed via their 2-wire 'PDI programming interface' which yields allows the devices to be programmed without using any user I/O pins.
 
The updated XMEGA support includes the following new features:
  • The RSTDISBL, JTAGEN and SUT0..1 fuses can now be programmed in both EDS and standalone mode without having to manually reset cycle the target XMEGA device.
 
To upgrade your existing programmer to support XMEGA AVR microcontrollers....
  • Download and install EQTools Build 2613 or above
  • Upgrade your programmer firmware to version 6.18 or above
 
The XMEGA AVR microcontrollers are only supported on the following Equinox programmers:
  • ISPnano Series 3 -  Production ISP programmer 
  • ISPnano Series 3 ATE -  Production ISP programmer with RELAY isolation 
  • ISPjuno - Portable ISP Programmer (coming soon)
 
About XMEGA AVR microcontrollers....
The XMEGA AVR  family of microcontrollers features the powerful AVR core, FLASH Code Memory, EEPROM Data Memory plus an on-chip USB peripheral. These devices can be used in a wide range of USB applications: high-end keyboards, mice, phone accessories, toys, serial adapters and industrial equipment. An on-chip bootloader permits very quick firmware download from a PC, without using a parallel programmer or dedicated hardware. Nonvolatile memory stores configuration parameters enabling the system to be instantly operational, even without connection to a PC.
 
Atmel XMEGA AVR AVR Family:

The following XMEGA devices are now supported in 2-wire PDI programming mode:

 

  • XMEGA A1 Family: ATxmega64A1, ATxmega128A1, ATxmega128A1U
  • XMEGA A3 Family: ATxmega64A3, ATxmega128A3, ATxmega192A3, ATxmega256A3, ATxmega256A3B
  • XMEGA D3 Family: ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3,
  • XMEGA A4 Family: ATXMEGA16A4, ATxmega32A4, ATxmega64A4
  • XMEGA D4 Family: ATxmega16D4, ATxmega32D4

Reference:JM070311-1
Date:07 March 2011
Author:John Marriott
Company:Equinox Technologies
 
 
 
Software Downloads
EQTools Version 4 - Full install *** Release version *** (V4.0 build 3913 30/01/2017) More Info
 
 
Associated Devices
XMEGA AVR
 
 
Associated Products
Atmel XMEGA AVR - PDI Interface - Device Library - OVERVIEW >>
ED-538 - Ethernet to DIO Module - 4 Digital Relays and 8 Digital Inputs >>
Equinox ISPnano-S5 - Production ISP Programming Module >>
Equinox ISPnano-S5 - Production ISP Programming Module >>
ISPnano - Production ISP Programmer family - OVERVIEW >>
ISPnano Production ISP Programmer Technology Overview >>
ISPnano Series 3 - GANG2 System - 2-channel production ISP programming system >>
ISPnano Series 3 - GANG4 System - 4-channel production ISP programming system >>
ISPnano Series 3 - GANG6 System - 6-channel production ISP programming system >>
ISPnano Series 3 - GANG8 System - 8-channel production ISP programming system >>
ISPnano Series 3 - Production ISP Programming Module - OVERVIEW >>
ISPnano Series 3 ATE - Production ISP Programming Module - OVERVIEW >>
ISPnano Series 4 ATE - Production ISP Programming Module with one Device Library >>
ISPnano Series 4 ATE - Production ISP Programming Module - OVERVIEW >>
ISPnano Series 4 ATE - Programmer Kit >>
ISPnano Series 4 ATE - Programmer Calibration Service >>
ISPnano Series 4 ATE - Programming Module only >>
ISPnano Series 5 - Production ISP Programming Module only >>
ISPnano-GANG Series 3 - multichannel ISP systems - OVERVIEW >>
ISPnano-MUX Family - Multiplexed ISP Programming Systems - OVERVIEW >>
ISPnano-MUX4 - 4 channel multiplexed ISP Programming System - OVERVIEW >>
ISPnano-MUX4-KIT - 4 channel multiplexed ISP Programming System - KIT >>
ISPnano-MUX8 - 8 channel multiplexed ISP Programming System - OVERVIEW >>
ISPnano-S3 - GANG2 - 2-channel ams Magnetic Position Sensor programming system >>
 
 
Application Notes
AN127 - Atmel XMEGA programming using the PDI and JTAG interfaces (V1.14 06/01/2013) More Info
 
 
                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
İ 1995-2023 Equinox Technologies (UK) Ltd.