Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
overview | archive | article
Atmel 24Cxxx Serial EEPROM Memory ISP programming support

Equinox Technologies are pleased to announce the launch of In-System Programming (ISP) support for Atmel 24Cxxx I2C Serial EEPROM memory devices on our range of ISP Programmers. This support will allow any 24xxx I2C EEPROM memory device to be programmed in-situ on a Target Board using the I2C 2-wire programming interface. Multiple I2C devices can be programmed on the same Target Support by simply selecting a different I2C address in the Programming Project. The fastest possible programming speeds are guaranteed as the EEPROM data is stored locally within the programmer. Standalone operation of the programmer (no PC) via single auto-program key is also possible making this solution ideal for high-volume production applications. The programmer can also be controlled from any Remote Application written in e.g.. C++, Labview, Visual Basic etc.

 

Features

  • In-System Programming (ISP) support for Atmel 24Cxxx I2C Serial EEPROMs
  • Programmer uses the I2C 2-wire interface to program the device in-situ on a Target Board
  • Supports both 100 kHz and 400 kHz I2C operating frequencies
  • Multiple I2C Memories on the same I2C bus can be programmed
  • Fast programming times due to local storage of data to be programmed
  • Supports Program/Verify per page or Program entire device and then verify
  • Supports 3.0 to 5.0V Target Voltage operation
  • Standalone programmer operation (no PC required) is possible
  • PC software utility supports automatic serial number (up to 64-bit) generation and programming

Device support:


Atmel – AT24Cxxxx Serial EEPROM Memories (I2C):

  • AT24C01A, AT24C01B
  • AT24C02A, AT24C02B
  • AT24C04, AT24C04A, AT24C04B
  • AT24C08A, AT24C08B
  • AT24C1024, AT24C1024B, AT24C1024SC
  • AT24C11
  • AT24C128, AT24C128B, AT24C128SC
  • AT24C16A, AT24C16B
  • AT24C256, AT24C256B
  • AT24C32, AT24C32A, AT24C32C, AT24C32SC
  • AT24C512, AT24C512B, AT24C512SC
  • AT24C64, AT24C64A, AT24C64B
  • AT24HC02B, AT24HC04B
  • AT34C02C

 Programmers supported:

  • Epsilon5, FS2003, PPM3-MK2

 Ordering information

The ‘24Cxxx Serial EEPROM’ programming algorithm is a chargeable license upgrade for the Epsilon5, FS2003 and PPM3-MK2 programmers. The ordering information for each programmer is detailed in the table below:

 

Reference:JM050508-2
Date:05 May 2008
Author:John Marriott
Company:Equinox Technologies
 
 
 
Associated Devices
Atmel 24Cxxx Serial EEPROM Memories
 
 
Associated Products
24xxx - Serial I2C EEPROM Memory - Device Library - OVERVIEW >>
EPSILON5 - Portable ISP Programmer for Serial EEPROM Memory Devices >>
EPSILON5MK4 - Portable ISP Programmer for Serial EEPROM Memory Devices >>
FS2009 - Portable high-speed multi-project USB In-System (ISP) Programmer - OVERVIEW >>
FS2009USB - Portable high-speed USB In-System (ISP) Programmer - OVERVIEW >>
FS2009USB(ARM) - Portable In-System (ISP) Programmer for ARM microcontrollers >>
ISPnano Series I - Production ISP Programming Module - OVERVIEW >>
PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW >>
 
 
Documentation
Configit - Equinox Programmer Firmware Update Utility (V9.0305/05/2008) More Info
AN112 - Equinox ISP Programmer Firmware Upgrade Instructions (V1.07 10/04/2009) More Info
Equinox Programmer Firmware - V3.07 - Upgrade Projects (Upload Wizard) (V3.07 21/03/2008) More Info
 
 
Application Notes
AN118 - In-System Programming (ISP) of I2C Serial EEPROM Memory Devices using Equinox ISP Programmers (V1.02 27/03/2009) More Info
 
 
                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.