Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
overview | archive | article
Serial EEPROM Memory ISP programming support extended

Following the successful launch of In-System Programming (ISP) support for Atmel 24Cxxx I2C Serial EEPROM memory devices on our range of ISP Programmers, Equinox have now extended this support to I2C Serial EEPROM memory devices from the following manufacturers:

  • Catalyst
  • Dallas
  • Exel
  • Holtek
  • IC Microsystems
  • ISSI
  • Microchip
  • Ramtron
  • Rohm
  • Seiko Instruments
  • ST
  • Xicor

 

This support will allow I2C EEPROM memory devices to be programmed in-situ on a Target Board using the I2C 2-wire programming interface. Multiple I2C devices can be programmed on the same Target Support by simply selecting a different I2C address in the Programming Project. The fastest possible programming speeds are guaranteed as the EEPROM data is stored locally within the programmer. Standalone operation of the programmer (no PC) via single auto-program key is also possible making this solution ideal for high-volume production applications. The programmer can also be controlled from any Remote Application written in e.g.. C++, Labview, Visual Basic etc.

 

Features

  • In-System Programming (ISP) support for I2C Serial EEPROMs
  • Programmer uses the I2C 2-wire interface to program the device in-situ on a Target Board
  • Supports both 100 kHz and 400 kHz I2C operating frequencies
  • Multiple I2C Memories on the same I2C bus can be programmed
  • Fast programming times due to local storage of data to be programmed
  • Supports Program/Verify per page or Program entire device and then verify
  • Supports 3.0 to 5.0V Target Voltage operation
  • Standalone programmer operation (no PC required) is possible
  • PC software utility supports automatic serial number (up to 64-bit) generation and programming

Please see 'Equinox ISP Programmer Device Support List' for the latest information on devices supported - this can be downloaded from the link at the right-hand side of this article. Please note: not all devices in a family may be supported.


Programmers supported:

  • Epsilon5, FS2003, FS2009, PPM3-MK2 & PPM4-MK1.

Order Codes: 

Device Support

Order code

Description

Epsilon-UPG16

FS2003-UPG16

FS2009-UPG16

PPM3A1-UPG16

PPM4MK1-UPG16

Serial I2C EEPROM Memory Device Library

This License Upgrade is for In-System Programming (ISP) support for I2C Serial EEPROM memory devices. This support will allow I2C EEPROM memory devices to be programmed in-situ on a Target Board using the I2C 2-wire programming interface.

Programmers

Order code

Description

EPSILON5(E2)

Portable high-speed In-System (ISP) Programmer for programming Serial I2C EEPROM Memory devices.  Standalone capability (1 project) and USB / RS232 connectivity.

 

Epsilon ‘Bundle’ options

 

Order code

Description

EPS-E2-BUNDLE

Epsilon5 – Portable ISP Programmer and Serial I2C EEPROM Memory Device In-System Programming (ISP) Upgrade Pack

This bundle pack includes an Epsilon5 Programmer which is enabled for SPI programming of Atmel AVR devices and Serial I2C EEPROM Memory Devices.

Reference:KD280109
Date:28 January 2009
Author:Kathryn Darlow
Company:Equinox Technologies
 
 
 
Associated Devices
Atmel 24Cxxx Serial EEPROM Memories
Catalyst CAT 24xxx - I2C (2 wire bus) CMOS Serial EEPROM
Catalyst CAT 34xxx - I2C (2 wire bus) Serial EEPROM for DDR2
Dallas DS28Cxxx - Serial EEPROM I²C/SMBus with non volatile PIO
Exel XL24Cxx - I2C (2 wire bus) CMOS Serial EEPROM
Holtek HT24LCxx - I2C (2 wire bus) CMOS Serial EEPROM
IC Microsystems X24Cxx - I2C (2 wire bus) Serial EEPROM
IC Microsystems X24xx - I2C (2 wire bus) Serial EEPROM
ISSI IS24Cxx - I2C (2 wire bus) Serial EEPROM
ISSI IS24Lxx - I2C (2 wire bus) Serial EEPROM
ISSI IS34Cxx - I2C (2 wire bus) Serial EEPROM
Microchip 24AAxx - I2C (2 wire bus) Serial EEPROM
Microchip 24C xx - I2C (2 wire bus) Serial EEPROM
Microchip 24FCxx - I2C (2 wire bus) Serial EEPROM
Microchip 24LC xx - I2C (2 wire bus) Serial EEPROM
Microchip 24VLxx - I2C (2 wire bus) Serial EEPROM
NXP (Philips) XA - 8051 Microcontroller Family
NXP (Phillips) PCAxxx - I2C (2 wire bus) Serial EEPROM
NXP (Phillips) PCFxxx - I2C (2 wire bus) Serial EEPROM
NXP (Phillips) PCFxxx - I2C (2 wire bus) Serial EEPROM
Ramtron FM24Cxx - I2C (2 wire bus) Serial EEPROM
Ramtron FM24Lxx - I2C (2 wire bus) Serial EEPROM
Ramtron FMCLxx - I2C (2 wire bus) Serial EEPROM
Rohm BR24Axx - I2C (2 wire bus) Serial EEPROM
Rohm BR24Cxx - I2C (2 wire bus) Serial EEPROM
Rohm BR24Lxx - I2C (2 wire bus) Serial EEPROM
Rohm BR24Sxx - I2C (2 wire bus) Serial EEPROM
Rohm BR34Lxx - I2C (2 wire bus) Serial EEPROM
Rohm BUxx - I2C (2 wire bus) Serial EEPROM
Seiko S-24Cxx - I2C (2 wire bus) CMOS Serial EEPROM
Seiko S-34Cxx - I2C (2 wire bus) CMOS Serial EEPROM
ST M24xx-F - I2C (2 wire bus) Serial EEPROM
ST M24xx-R - I2C (2 wire bus) Serial EEPROM
ST M24xx-W - I2C (2 wire bus) Serial EEPROM
ST M34xx - I2C (2 wire bus) Serial EEPROM
Xicor X24Cxx - I2C (2 wire bus) CMOS Serial EEPROM
Xicor X24xx - I2C (2 wire bus) CMOS Serial EEPROM
 
 
Associated Products
24xxx - Serial I2C EEPROM Memory - Device Library - OVERVIEW >>
ED-538 - Ethernet to DIO Module - 4 Digital Relays and 8 Digital Inputs >>
EPSILON5 - Portable ISP Programmer for Serial EEPROM Memory Devices >>
EPSILON5MK4 - Portable ISP Programmer for Serial EEPROM Memory Devices >>
FS2009 - Portable high-speed multi-project USB In-System (ISP) Programmer - OVERVIEW >>
FS2009 - Portable multi-project ISP Programmer for Atmel AT91SAM7 Microcontrollers >>
FS2009USB - Portable high-speed USB In-System (ISP) Programmer - OVERVIEW >>
FS2009USB(ARM) - Portable In-System (ISP) Programmer for ARM microcontrollers >>
ISPnano Series 2 - Production ISP Programming Module - OVERVIEW >>
ISPnano Series 3 - GANG2 System - 2-channel production ISP programming system >>
ISPnano Series 3 - GANG4 System - 4-channel production ISP programming system >>
ISPnano Series 3 - GANG6 System - 6-channel production ISP programming system >>
ISPnano Series 3 - GANG8 System - 8-channel production ISP programming system >>
ISPnano Series 3 - Production ISP Programming Module - OVERVIEW >>
ISPnano-GANG Series 3 - multichannel ISP systems - OVERVIEW >>
ISPnano-MUX Family - Multiplexed ISP Programming Systems - OVERVIEW >>
ISPnano-MUX4 - 4 channel multiplexed ISP Programming System - OVERVIEW >>
ISPnano-MUX4-KIT - 4 channel multiplexed ISP Programming System - KIT >>
ISPnano-MUX8 - 8 channel multiplexed ISP Programming System - OVERVIEW >>
ISPnano-S3 - GANG2 - 2-channel ams Magnetic Position Sensor programming system >>
 
 
Documentation
Equinox ISP Programmers - Device Support List (EQTools V2.0-b115601/02/2010) More Info
Current Price List (GBP) - Equinox In System Programming Tools (VMay 09 28/05/2009) More Info
Current Price List (EUR) - Equinox In System Programming Tools (VMay 09 28/05/2009) More Info
Current Price List (USD) - Equinox In System Programming Tools (VMay 09 28/05/2009) More Info
 
 
Application Notes
AN118 - In-System Programming (ISP) of I2C Serial EEPROM Memory Devices using Equinox ISP Programmers (V1.02 27/03/2009) More Info
 
 
                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.