| 15A DC Power cable - 2-way Power plug to bare ends (2m) This is a DC Power cable suitable for plugging into an Equinox 'ISPnano-PSU-10W' connector module. It is designed to provide the main power feed to a group of ISPnano programmers. Cable length: 200cm. Colour: Red / Black | CAB-PWR-003
| call
|
| 20-way ISP cable (0.1" IDC ribbon cable) for ARM microcontrollers 20-way ISP (In-System Programming) cable (0.1" IDC ribbon cable) for ARM microcontrollers | CAB-ARM-20W
| call
|
| AMP Cable Assemblies - 2 / 4 / 8 / 16 Wire Crimped AMP Cables
| |
|
| ARM 10-way ISP Cable for Epsilon5, FS2003 & FS2009 programmers This cable allows an Equinox Epsilon5, FS2003, FS2009 or FS2009USB programmer to connect to any ARM Target System which features a 10-way 'ARM JTAG Debug Connector'. the relevant 'ARM Device Library' must also be purchased. | ASSY-ARM-10W
| call
|
| ARM 20-way ISP Cable for Epsilon5, FS2003 & FS2009 programmers This cable allows an Equinox Epsilon5, FS2003, FS2009 or FS2009USB programmer to connect to any ARM Target System which features a 20-way 'ARM JTAG Debug Connector'. the relevant 'ARM Device Library' must also be purchased. | ASSY-ARM7-20W
| call
|
| ARM Cortex - 10-way ISP ribbon cable - 150mm length (0.05" pitch connectors) The CAB-ARM-10W-150 is an ISP ribbon cable designed to connect between a device programmer and an ARM Target Board. The cable features a 10-way 0.05" connector on each end. Cable length: 150mm. | CAB-ARM-10W-150
| call
|
| AXM-12G - /INT - Trigger Cable For MCC I2C adaptors - 12 inches long AXM-12G - /INT - Trigger Cable For MCC I2C adaptors - 12 inches long | MIIC-AXM-12G
| call
|
| Bus Monitor Plus - PC Card Interface Cable (CPCC-50-39) This is a spare cable which connects between the MCC Bus Monitor Plus unit and the PC Card Interface which plugs into a PC Card slot on a PC. This product is just the cable, it does not include the PC Card Interface. | MIIC-CPCC-50-39
| Discontinued Product |
| CABCL - I2C & SMBus Clip Lead Cable Clip lead cable, including mini-clip lead connectors for attaching to I2C and SMBus devices. | MIIC-CABCL
| call
|
| DC Power cable - 2-way JST connector to bare wires (1.5m white) This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. One end of the cable is fitted with a 2-way JST connector and the other end is bare wires. Cable length: 1.5m. Colour: White | CAB-PWR-004
| call
|
| DC Power cable - 2-way JST connector to bare wires - colour black - length 800mm. DC Power cable - 2-way JST connector to bare wires - colour black - length 800mm. | CAB-PWR-1
| call
|
| DC Power cable - 2.5mm Jack plug to bare tinned soldered ends (190mm) This is a DC Power cable with a 2.5mm jack plug on one end and bare tinned soldered wires on the other end. It is suitable for powering any Equinox programmer (except ISPnano) from an external lab power supply. | CAB-PWR-2
| call
|
| I2C Bus Cables Overview of I2C Bus Cables suitable for use with the MCC range of I2C Adaptors. | MIIC-I2CCABLE
|
|
| I2CMCAB - I2C Bus Mini CAB Cable for I2CStick / MIIC-208 I2C Bus Mini CAB Cable, 0.6 m (2 ft.) long for use with the I2CStick and / MIIC-208
| MIIC-I2CMCAB
| call
|
| I2CMIC - I2C Bus Mini Interface Cable for I2CStick I2C Bus Mini Interface Cable, 0.6 m (2 ft.) long for use with the I2CStick.
| MIIC-I2CMIC
| Discontinued Product |
| ISP Adaptor Cable for Phyton ChipProg Programmers This adaptor cable plugs into the 40-pin ZIF socket of the Phyton ChipProg Programmer range and brings out the pins to a ribbon cable. The cable can then be wired to a header on a Target Board to facilitate In-System Programming (ISP). | PHY-AE-ISP-U1
| call
|
| ISPnano Cable Kit (standard)
| CAB-ISPNANO-KIT
| call
|
| ISPnano DC Power cable - 2-way JST to 2-way JST connector - 40cm - black This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. Both ends of the cable are fitted with a 2-way JST connector. Cable length: 40cm. Colour: Black | CAB-PWR-003
| call
|
| ISPnano DC Power cable - 2-way JST to 2-way JST connector - 40cm - white This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. Both ends of the cable are fitted with a 2-way JST connector. Cable length: 40cm. Colour: White | CAB-PWR-002
| call
|
| ISPnano RS232 Serial Cable - RJ11 to 9-way D Connector ISPnano RS232 Serial Cable - RJ11 to 9-way D Connector | EQ-RS232-RJ11
| call
|
| ISPnano Target In-System Programming (ISP) Cable - 16-way IDC Ribbon cable Target In-System Programming (ISP) Cable - 16-way IDC Ribbon cable for ISPnano. | CAB-16W/16W-ISP-RIBBON
| call
|
| MCC - USB Cable - suitable for the MCC-204 I2C Adaptor MCC - USB Cable - suitable for the MCC-204 I2C Adaptor | MIIC-CAB-USB1
| Discontinued Product |
| Newlink - USB Serial Adaptor Cable Spare USB Serial Adaptor Cable for Epsilon5MKII/III and FS2009 ISP programmers | CAB-USB-Newlink
| call
|
| Phyton USB 2.0 - Type A Male to Type A Female Extension Cable
| PHY-USB2-06-AB
| call
|
| RS485 Convertor - Cable Pack (5 x 0.5m RS485 Cables) Pack of 5 x 0.5m flat RS485 cables suitable for interconnecting Equinox PPM3-MK2 Programmer Modules via the RS485 Bus.Each cable is 0.5m long and terminated with an RJ45 connector. | CAB-RS485-05-5PK
| call
|
| RS485 Interconnect Cable RS485 Interconnect Cable | CAB-RS485-2
| call
|
| RS485 Interconnect Cable for ISPnano programmers This cable is used to interconnect the RS485 signals between ISPnano programmers. It plugs into the RS485 In / Out connector on the ISPnano programmer. | CAB-RS485-ISPnano-1
| call
|
| Serial Cable - 25-way Male to 9-way Female - 0.30m Serial Cable - 25-way Male to 9-way Female - 0.30m | CAB-25M9F-030M
| call
|
| Serial Cable - 25-way Male to 9-way Female - 2m Serial Cable - 25-way Male to 9-way Female - 2m | CAB-25M9F-2M
| call
|
| Serial Cable - 9-way Male to 9-way Female - 1.5m Serial Cable - 9-way Male to 9-way Female - 1.5m | CAB-9M9F
| call
|
| Spare 10-way In-System Programming (ISP) Cable for Equinox Programmers (200mm) Spare 10-way In-System Programming (ISP) Cable for Equinox Programmers (200mm) | CAB-ISP10W200
| call
|
| Spare 10-way In-System Programming (ISP) Cable for Equinox Programmers (500mm) with pull handle Spare 10-way In-System Programming (ISP) Cable for Equinox Programmers (500mm) with pull handle | CAB-ISP10W500
| call
|
| Spare 6-way In-System Programming (ISP) Cable for Equinox Programmers (200mm) Spare 6-way In-System Programming (ISP) Cable for Equinox Programmers (200mm) | CAB-ISP6W200
| call
|
| Trace cable for any Phyton PICE Emulator system Optional Trace cable for any Phyton PICE Emulator system. Provides micro hooks for entering 8 ext. signals and outputting 4 triggers. Plugs into PICE unit. | PHY-TC-R1
| call
|
| USB 2.0 - Type A Male to Type A Female Extension Cable USB 2.0 - Type A Male to Type A Female Extension Cable | CAB-USB-2.0
| call
|
| USB Cable - USB Type A Plug to Mini Type B Plug - 2m USB Cable - USB Type A Plug to Mini Type B Plug - 2m | CAB-USB-MINI-5WAY
| call
|
| USB to RS232 Convertor Cable - using the FTDI-Chip Cable interfacing an RS232 periperhal to a USB port. using the FTDI-Chip. | FTD-KABELUSB
| call
|
| USB to RS232 Serial Convertor Cable Spare USB to RS232 Serial Convertor Cable for Epsilon5 and FS2009 ISP programmers | CAB-USB-RS232
| call
|