Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer

Download File...

To download the selected file, click on the Download button below.
If the file is labelled as an 'External Link' this will link you to a page on an external web site.

newEpsilon5 MK2 Programmer - Firmware Upgrade Version 5.36
Download Type Manufacturer Release Date Version File Type File Size
Firmware Equinox Technologies 06/06/2011 5.36 Compressed File (*.zip) 45kb
Short Description This is a Firmware Upgrade Project for an Epsilon5 MK2 programmer which upgrades the firmware to version 5.36.
File Name EPSILON5_MK2_Firmware_Upgrade_V5-36.zip
 
 

Long Description:

This is a 'Firmware Upgrade Project' for the Equinox EPSILON5 MK2 programmer.

Programmer: EPSILON5 MK2
Upgrade to firmware version: 5.36
Release date: 6th June 2011

New features in this version:

  • Firmware now supports the full 512kb of FLASH Storage available on the EPSILON5 MK3 programmer (earlier firmware versions only supported 256 kBytes)

Algorithms supported in this version:

  • Atmel AVR - SPI interface
  • Atmel AVR - JTAG interface
  • Atmel AT89C51Rxx - 8051 UART programmable devices
  • Atmel AT91SAM7 - JTAG interface
  • Atmel AT89Sxxxxx - SPI interface
  • NXP - 89C51Rxx - 8051 UART programmable devices
  • Zensys ZWxxx Series - SPI interface
  • All silicon vendors - generic 24xxx I2C serial EEPROM memories

Problem corrections:

1. AVR Fuse Write / Verify did not work in standalone mode
The Fuse Write / Verify operation for Atmel AVR devices did not work in standalone mode in firmware 5.34. This problem is fixed in firmware 5.36.

2. AVR Calibration Byte problem in standalone mode
If the 'AVR Calibration Byte' was set to be programmed into the FLASH in standalone mode, the 'Calibration Byte' would be written to the wrong address. This problem is fixed in firmware 5.36.

Firmware installation instructions:

  • Unzip the attached *.PPC file
  • Check which version of the Epsilon5 programmer you have by selecting .
  • Use EQTools or Upload Wizard to upload the correct 'Firmware upgrade PPC file' to the programmer.
  • The programmer will then automatically re-flash its firmware.

Further help:

For further help with upgrading your programmer firmware, please refer to Application Note AN112. 

 

Please note:

If you are currently logged in to your Equinox Account, you can view your Customer Home Page by clicking on the 'My Account' link at the top of the browser window.

                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.