Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer

Download File...

To download the selected file, click on the Download button below.
If the file is labelled as an 'External Link' this will link you to a page on an external web site.

newISP-PRO Version IV - Production ISP Monitoring software - Full install *** Release version ***
Download Type Manufacturer Release Date Version File Type File Size
Software Equinox Technologies 02/05/2018 Version 4 build 4031 Compressed File (*.zip) 11,947Kb
Short Description This is the download for the ISP-PRO Version IV - Production ISP Monitoring software.
File Name ISP-PRO-V4-build-4037-installer.zip
 
Windows Versions supported      
Windows 10
Windows 2000
Windows 7 - 32-bit version
Windows 7 - 64-bit version
Windows 98
Windows ME
Windows NT4
Windows Vista
Windows XP
 

Long Description:

1.0 Overview of this release

1.1 Introduction

The document describes the new functionality, features and device support in this version of the

ISP-PRO Version 4 software application.

 

 

1.2 Software versions in this release

This release of ISP-PRO contains the following software utility versions:

 

Software application name

Software version

Description

ISP-PRO

Version 4 Build 4037

Main EQTools application

Upload Wizard

Version 4 Build 4019

Utility used to upload ‘Standalone Programming Projects’ to a programmer.

ADOExplorer

Build 3176

Utility used to monitor / control the Interface Database.

ac_isppro

Interface Database

Version 30
*** New version ***

This is the Interface Database which is shared between EQTools and ISP-PRO.

The database has been upgraded to version 30.
 

Z-Wave S2 Security Crypto dll

Version 2.0 (Build 1.13302)

This is a special dll required for use with Z-Wave "S2 Security" key generation.

 

 

1.3 Supported Windows operating systems

This release of ISP-PRO has been developed under Windows Vista and should be compatible with the following versions of Windows:

 

  • Windows 98
  • Windows 2000
  • Windows NT4
  • Windows XP (need to install Service Pack 2)
  • Windows Vista
  • Windows 7 (32-bit version)
  • Windows 7 (64-bit version)
  • Windows 8
  • Windows 10

 

Please note:

We have tested this release on Windows XP, Windows 7 and Windows 10. It has been installed but not fully tested on Windows 7 (64-bit version). If you have any problems with either the installation or operation of ISP-PRO on this version of Windows, please contact Equinox Technical Support and we will be more than happy to help debug the problem for you.

 

 

 

 

1.4 Programmers supported

This version of the ISP-PRO application supports the following Equinox programmers:

 

Programmer

Description

Production status

PPM3-MK2

Production ISP Programming Module – expandable up to 16 programming channels.

In production – will be replaced by PPM4-MK1

PPM4-MK1

Production ISP Programming Module – expandable up to 32 programming channels.

In production

ISPnano Series 1

Production ISP Programming Module – expandable up to 32 programming channels.

Discontinued – replaced by Series 3

ISPnano Series 2

Production ISP Programming Module – expandable up to 32 programming channels.

Discontinued – replaced by Series 3

ISPnano Series 3

Production ISP Programming Module – expandable up to 32 programming channels.

In production

ISPnano Series 3 ATE

Production ISP Programming Module – expandable up to 32 programming channels.

In production

ISPnano-MUX

MUX2 / MUX4 / MUX8 – Sequential ISP programming systems

In production

ISPnano Series 4 ATE

Production ISP Programming Module – expandable up to 32 programming channels.

In production

 

Please note:

The Equinox EPSILON5, FS2003 and FS2009 programmes are no longer supported by ISP-PRO.

 

1.5 ISP-PRO Version 4 Overview

‘ISP-PRO Version 4’ is a completely new version of ISP-PRO which replaces the existing ’ISP-PRO Version 3’ software. This version has been completely rewritten and offers much faster programming due to enhanced communications drivers and optimised multi-programmer scanning algorithms. This version also introduces support for the new range of Equinox multiplexer ISP programmers – the ISPnano-MUX2, ISPnano-MUX4 and ISPnano-MUX8.

 

1.6 Important licensing information for ISP-PRO Version 4

‘ISP-PRO Version 4 ’ is a completely new version of ISP-PRO which replaces the existing ’ISP-PRO Version3’.  If you already have ‘Version 3’ running on a PC and you wish to upgrade to ‘Version 4’, please contact Equinox to purchase the relevant upgrade license.

 

Important note:

‘ISP-PRO Version 4’ requires a ‘License upgrade’ to be purchased from Equinox and then installed on all programmers which are to run this new version.
 

1.6 Installation instructions

Please download the ‘ISP-PRO User Manual’ for full step-by-step installation instructions for the ISP-PRO application.

 

Instructions to install the new version of ISP-PRO…..

  • If you already have an earlier version of ISP-PRO installed, uninstall this older version by selecting Program Files à Equinox à Uninstall ISP-PRO-V3   
  • Launch the install for the new ISP-PRO Version 4
  • The new version of ISP-PRO will be installed into a new folder /equinox/ISPPROV4..

 

To run the new version of ISP-PRO….

  • Double-click the ISP-PRO icon or select Start à Programs à Equinox à ISP-PRO V4

 

 

2.0 New functionality in ISP-PRO build 4931

 

2.1 Enhanced Z-Wave "S2 key generation" algorithm support (build 4931)

It was found that the previous algorithm could produce duplicate keys across multiple PCs.

To fix this problem, this version of ISP-PRO introduces a completely new 'Z-Wave S2 key generation' algorithm.

  • completely new 'Z-Wave S2 key generation' algorithm.
  • Enhanced 'duplicate key' checking
  • New algorithm to reverse check the 'PUBLIC key'.

 

2.2 Database Analyser utility (build 3974)

This version of ISP-PRO introduces a finalised version of our new 'Database Analyser' utility. This utility can be used to search the ISP-PRO interface database for the results of all programming operations.

 

2.3 Z-Wave 'QRcode - Decoder' utility (build 3974)

This version of ISP-PRO introduces a finalised version of our new Z-Wave 'QRcode decoder' utility. This utility has been developed to be able to read / decode any Z-Wave 'SmartStart label'.

It decodes the scanned QR code into its component data allowing the label to be checked for any issues.

 

2.4 Z-Wave - enhanced functionality of Production Control File (build 3974)

This version of ISP-PRO introduces enhanced functionality for the 'Production Control File.

 

Please note:

If you are currently logged in to your Equinox Account, you can view your Customer Home Page by clicking on the 'My Account' link at the top of the browser window.

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
1995-2018 Equinox Technologies (UK) Ltd.