|
Download File...
To download the selected file, click on the  button below.
If the file is labelled as an 'External Link' this will link you to a page on an external web site.
 |
AN110 - ASCII Text Control (ATC) Protocol for Remote Control of Equinox ISP Programmers |
| Application Note |
Equinox Technologies |
27/03/2009 |
1.06 |
 Application Note (*.pdf) |
212kB |
| This Application Note describes how to control Equinox ISP programmers using the ASCII Text Control (ATC) Protocol. |
| AN110_ASCII_ATC_Protocol_V106_270309.pdf |
 |
| |
|
|
| |
This application note describes the ‘ASCII Text Control (ATC)’ Protocol for Remote Control of Equinox programmers. This protocol can be used to control an Equinox programmer from a Remote Application or Remote System using a simple set of ASCII commands. This protocol is ideal for controlling Equinox programmers from any Remote System which features an RS-232 serial port and which can operate at a fixed baud rate of 38,400.
This protocol only allows ONE Equinox programmer to be controlled at a time and only allows the remote starting and status polling of ‘Programming Projects’. The protocol does NOT support direct reading / writing of data from Target Devices or direct control of the actual programming functions. |
| |
Please note:
If you are currently logged in to your Equinox Account, you can view your Customer Home Page by clicking on the 'My Account' link at the top of the browser window.
|
