| |
TRP-C28 - 4-CH isolated digital input and 4-CH power relay output RS-485 module |
|
|
|
|
|
| |
The TRP-C28 which supports ASCII and Modbus RTU, features 4 optical isolated digital input channels and 4 output power relays.
All channels have screw terminals for convenient connection of field signals as well as LED’s to indicate channel status.
Input channels are equipped with 3750Vms DC isolation and surge protection on RS-485 data lines.This protects the module and device against high power voltage input and ground potential differences.
For easy user access the TRP-C28 can enter configuration mode and self-test mode using an outer dip-switch.
The TRP-C28 supports both ASCII and Modbus protocol. With a full set of commands, dual watch-dog and auto reset function the module can be bi-directionally remote controlled by the PC in ASCII or Modbus RTU protocol.
. |
| |
|
|
|
 |
Features |
|
- Wide input range DC power supply
-
Support ASCII and Modbus RTU protocol
-
Supports baud rates from 1.2Kbps to 115.2 Kbps
-
All 4 channels digital input ca be used as counter
-
Digital input signal with 3750Vrms isolation protection
-
Dual watchdog: Module’s firmware, host computer traffic
-
LED for each channels working status
-
DIN rail and panel mount support
-
Configured and self-test by outer dip-switch
-
Support screw terminal and external DC power adaptor
|
|
Specifications |
|
- Input channel: 4 digital input channels
-
Input optical isolation: 3750 Vrms
-
Input logical level 0 +1V (max)
-
Input logical level 1 +4.0V ~ +30V
-
Communication interface: RS-485
-
Communication speed: Baud rate from .2kbps to 115.2Kbps
-
Input impedance: 3Kohm
-
Distance: 500m (max)
-
Digital Input can be used as counter channel: 4
-
Counter frequency: 100Hz
-
Output channel: 4 channel power reply outputs
-
Relay type: 2 Form A (RL1,RL2) , 2 Form C (RL3,RL4)
-
Contact ratting: 5A /30V DC , 5A /120V AC , 5A /250V AC
-
Relay surge strength: 4kV
-
Relay operating time: 3mS
-
Relay operating life: 2 X 10(7)
-
Dual watchdog: Hardware reset circuit, module and host operating status
-
Signal LED: Power on, all channels
-
Power supply: Screw terminal, or external DC adapter
-
Connection type: Screw terminal, accepts AWG #12~320 wires
-
Power consumption: 2.7W
-
Operating environment: 0 to 60℃
-
Storage temperature: -20 to 70℃
-
Humidity: 10-90% Non-condensing
-
Dimension: 151mm X 75mm X 26mm
-
Weight: 400g
|
| |
|  |
| Product Information |
| TRP-C28 - 4-CH isolated digital input and 4-CH power relay output RS-485 module |
| Trycom Technology |
|
TRP-C28 |
| Discontinued Product |
|
|
View Downloads for this Product
