Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
Order Information | Device Support | Features | System Contents | Associated Products
 

Motorola - HC908JB8 USB Starter Kit

  
 
 

The USB08 kit is a complete plug and play Starter System for anyone looking to develop a USB application using the Motorola HC908JB8 microcontroller.

The kit includes a USB development board, Windows USB demo application, device driver, USB cable and on-board FLASH programming interface. The demo board in conjunction with the Windows USB demo application supplied make up the Motorola Reference Design for this powerful FLASH microcontroller.

The HC908JB8 device itself is a dedicated USB 1.1 (1.5 MBits) slave controller in a 28-pin SOIC package and features 8kb of FLASH memory, 256 bytes of RAM, up to 21 I/O pins, an Integrated USB Module, keyboard interface, 2 x timer and an on-chip watchdog and reset controller.

 
 

Features

  
 
Evaluation Board
  • HC908JB8 Controller in SOIC28 Package
  • 3 LEDs
  • 3 Push Buttons
  • 3 Analog Sensors (light, temperature, angle)
  • Power Supply either via USB or by on-board fixed voltage regulator
  • Monitor-Mode Interface for in-system programming and debugging
  • Additional RS232 Interface provides connection for a PC or a serial LCD
  • Push Buttons for Reset and IRQ, Jumper for Power-On Reset
  • Controller Signals are available over two 26-pin Header Connectors
  • Wire Wrap Area for additional user components (approx. 20cm2)
  • Printed Circuit Board - Dimensions: 80mm x 100mm
Motorola MC68HC908JB8 Microcontroller
  • 8 KB Flash Memory
  • 256 Byte RAM
  • 3 MHz Bus-Clock (6 MHz Quartz)
  • In-System-Programming and Debugging (Monitor Mode)
  • Keyboard-Interface with eight Inputs (w/ Interrupt)
  • 2x 16-Bit Timer (Input Capture/Output Compare/PWM)
  • Integrated Watchdog and Reset Controller
  • Up to 21 digital I/O Pins (SOIC28 Package)
  • Integrated USB Module
 
 

Device Support (by family)

  
 
This product supports devices from the families listed below:
 
Freescale:
  • HC08 FLASH Microcontroller Family

 

Device Support (by manufacturer / programming algorithm)

  
 

Motorola
 
JTAG - In System Programming (ISP) via JTAG Debug Port (chargeable upgrade for Equinox Programmers):
HC08 FLASH Microcontroller Family:
MC68HC908JB8

 

Ordering Information...

  
 
 
Motorola - HC908JB8 USB Starter Kit
The USB08 kit is a complete plug and play Starter System for anyone looking to develop a USB application using the Motorola HC908JB8 microcontroller.
Manufacturer:  Elektronikladen
Order Code:  EL-USB08
Discontinued Product


Product Information
Product:  Motorola - HC908JB8 USB Starter Kit
Manufacturer:  Elektronikladen
Order Code:  EL-USB08
Discontinued Product
 
 
Associated Products View All
Embedded Systems Tools
Imagecraft - ICC08 - Toolset for the Freescale HC08 Microcontroller Family >>
                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.