This adapter is designed to support primarily FUJITSU ISP-programming connections and developer kits. Galep5 isn't able to control a PCs RS232 port.
In this case the Galep5 provides the required set of signals on the DIP48 connection. The signal type is TTL depending on the selected device power supply level.
If additional level shifter are required, the adapter 210915 is suggested to replace PC RS232 UART port. Connecting an RS232 port with Rx, Tx, RTS, CTS, DTR and DSR signals with Galep5 is possible with this adapter.
A 16pol. multi-pin connector is added for FUJITSU ISP-connections, which require only TTL level signals.
An external power supply switch permits the ON/OFF control of ISP-targets which require more than 200mA power supply.
Additional pins are connected for controlling programming machines.