 |
| |
EPSILON5 - Portable ISP Programmer - Atmel AVR - JTAG algorithms only |
|
|
|
|
|
| |
The Epsilon5 Portable USB ISP Programmer is a high-speed development / field / production programmer supporting most in-system programmable (ISP) microcontrollers from Atmel, Philips and Zensys. The programmer can be operated under PC control during development and for project configuration / uploading using the EQTools Toolsuite. For field / production applications the unit is designed to operate in ‘Standalone Mode’. A ‘Programming Project’ can be recalled from the on-board non-volatile FLASH memory and programmed into a Target System by pressing a single key.
The Epsilon5(AVR-JTAG) supports high-speed In System Programming (ISP) of Atmel AVR microcontrollers via the JTAG interface. |
| |
| Ideal programmer for development, field service and production applications |
| |
|
|
|
 |
Supports PC Controlled and Standalone Programming |
|
- Development Mode - using Equinox Development Suite (EDS) under PC control
-
Standalone Mode - ideal for field or small-scale production use (no PC required)
|
|
Main features |
|
- Fastest programming times possible due to on-board data, high-speed SPI and JTAG port
-
Supports programming of FLASH, EEPROM, FUSE bits, Security bits and RC Oscillator Calibration bytes
-
2Mbits of on-board non-volatile FLASH memory for user project storage (Standalone Mode)
-
JTAG Port - FAST ISP using JTAG algorithm
|
|
Controlled / configured by Equinox EQTools Software |
|
- Equinox Development Suite (EDS)
-
Project Builder - to create/edit Programming Projects
-
Project Manager - to create and maintain Project Collections
-
Project Upload / Download Utility - to upload projects to the programmer for use in Standalone Mode
|
|
Supports all popular ISP Headers to connect to the Target System |
|
- Atmel 10-way SPI Header (as per STK200 / STK500)
-
Atmel 6-way SPI Header
-
Equinox 10-way SPI header with support for Slave Select & SCK2
-
Atmel 10-way JTAG header (as per Atmel JTAG-ICE)
|
| |
| |
Device Support (by family) |
|
|
|
|
|
| This product supports devices from the families listed below: |
| |
Atmel (Microchip):
-
AT90CAN - AVR with on-chip CAN : AVR microcontroller with on-chip CAN
-
AT90USB - AVR FLASH Microcontroller Family
-
ATmega AVR - FLASH Microcontroller Family
-
ATmegaxxxP 'PICO Power' AVR Microcontroller Family
ON Semiconductors (Catalyst):
-
Catalyst CAT 24xxx - I2C (2 wire bus) CMOS Serial EEPROM
|
|
The following are available as chargeable upgrades: SPI In-System Programming support for the Atmel ATmega AVR Family; 24Cxxx - Serial I2C EEPROM Memory Device Library and Atmel AT91SAM7 Upgrade Pack. See [Upgrades] tab.
|
| |
|
Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.
|
| |
This product has been discontinued. Please refer to the Replacement Product instead:
For further information about related products, please see the Overview Product.
|  |
|
View Downloads for this Product
