|
|
 |
Interfaces to any suitable Equinox programmer e.g. PPM3 Module |
|
|
|
- Easily removeable from the programmer to allow main programmer board to be swapped without rewiring the Test Fixture
-
Plugs into mating connectors on Equinox programmer
|
|
Caters for all popular ISP Header connectors |
|
- Atmel 10-way IDC ISP Header
- Atmel 6-way IDC ISP Header
- Equinox 10-way IDC ISP header
|
|
‘Fast Connect’ clip-in connectors |
|
- Ideal for direct wiring to Test Fixture i.e wires from bed-of-nails probes
- Ideal for prototyping stage as wires can easily be plugged / unplugged
|
|
Screw terminals for power connections |
|
- GND - Connect to the GROUND of the Target System
- Vcc - Connect to the Target Vcc (see Jumper J28)
- +9V - Allows programmer to be powered from external +9V DC regulated supply
|
|
Target Vcc Jumper Link |
|
- Fitted - Programmer Vcc is connected to Target Vcc (+5V only for PPM3)
- Not Fitted - Programmer and Target Vcc are isolated
|
|
Target Vcc Presence LED (RED) |
|
- Illuminates when Target Vcc is detected
- Jumper J28 mut be inserted to connect the Target Vcc
|
| |
View Downloads for this Product
