Equinox Products Page - REP430F - Replicator for the TI MSP430 microcontroller Family

Currency:


	0 Item(s)

Your Account

Order Information | Device Support | Features

REP430F - Replicator for the TI MSP430 microcontroller Family

The REP430F replicator is dedicated to programming the Texas Instruments (TI) MSP430Fxx family of microcontrollers. It allows the programming of target devices via the JTAG Interface (4-wires), SBW (Spy-Bi-Wire) (2-wires) and via the BSL (Boot Strap Loader) Interface. The replicator is built on the newest MSP430F5437 MCU with 256 kB of flash memory.

The REP430F replicator operates in accordance with TI's MSP430 Memory Programming User’s Guide Application Note SLAU265 . The AN SLAU265 documents the JTAG communication protocol that allows erasing, programming and verification of the MSP430 MCU via JTAG or Spy-Bi-Wire communication protocols. MSP430Fxx microcontrollers can be programmed via the JTAG or Spy-Bi-Wire Interface as long as the Security Fuse is not blown. When the Security Fuse is blown then the MSP430Fxx microcontrollers can still be accessed, but only via the BSL Interface. The complete C source code and project files are provided by Texas Instruments. See AN SLAU265 and TI website for details. Software package can be directly downloaded from TI website.

Features

Main Features

Fast MSP430 Flash Programmer Contains an MSP430F5437 as a host MCU with 256 kB of flash for saving firmware and code.
Supports all MSP430 flash-based devices. There are specific software projects for the following target device Replicator implementations:
    Replicator: For MSP430 architecture devices (includes both 4-wire JTAG and Spy-Bi-Wire implementation)
    Fast MSP430 Flash Programmer ReplicatorX: For MSP430X extended architecture devices only (includes both 4-wire JTAG and Spy-Bi-Wire implementation)
   ReplicatorXv2: For MSP430Xv2 (5xx, 6xx Family) extended architecture devices only (includes both 4-wire JTAG and Spy-Bi-Wire implementation)
Fast MSP430 Flash Programmer Maximum target device program code size: approximately 200kB KB.
Programming speed (Erase, Program, Verify): approximately 8 KB in 1.5 s, 48 KB in 8 s
Verify and erase check: 17 KB/10 ms
JTAG access fuse (permanently disables device memory access via JTAG)
Stand-alone target programming operation (no PC or additional supporting hardware/software required)
Fast MSP430 Flash Programmer Programmable Vcc from 2.1V to 3.6V with step 0.1V.
Power supply via external power supply (8V to 10V) or from target device (2.5V-3.6V).
JTAG, SBW and BSL interface support with capability to blow the security fuse.
Supports disabling of JTAG port by blowing the Security Fuse.

Device Support (by family)

This product supports devices from the families listed below:

Texas Instruments:

MSP430 Flash Microcontroller Family

Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.

Ordering Information...

REP430F - Replicator for the TI MSP430 microcontroller Family
The REP430F replicator is dedicated to programming the Texas Instruments (TI) MSP430Fxx family of microcontrollers. It allows the programming of target devices via the JTAG Interface (4-wires), SBW (Spy-Bi-Wire) (2-wires) and via the BSL (Boot Strap Loader) Interface.

Manufacturer:	Elprotronic Inc.
Order Code:	ELP-REP430F

Discontinued Product

Product Information

Product:	REP430F - Replicator for the TI MSP430 microcontroller Family
Manufacturer:	Elprotronic Inc.
Order Code:	ELP-REP430F
Discontinued Product

Device Support

Device Support List

Home

Refund Policy

Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.