Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
Order Information | Device Support | Further information | Associated Products | Downloads
 

USB Dongle for Imagecraft JumpStarter C V8 - STANDARD Version

 
 
 
This USB Dongle for the Imagecraft JumpStarter C V8 STANDARD Version allows you to  install the compiler on as many computers as you like.
 
Please note: You must have already purchased the JumpStarter C compiler before purchasing this dongle. The dongle cannot be purchased as a standalone item unless you already have a licensed copy of the compiler.
 
 

Further information

 
 
Dongle Driver Installation Instructions
Device Support

Dongle Driver Installation Instructions

Overview
---------------------
It is necessary to install the correct drivers for the Hardware Dongle in order for it to work with the ICCAVR compiler. Please follow the instructions below to install the drivers.

Instructions
--------------------
1. Launch a Command Prompt Window
- From the Windows desktop, Select <Start><Run> and then type 'cmd' (without the quotes) and click the <OK> button.

2. Change to the \\drivers directory
- Type 'cd c:\\icc\\drivers' (replace  c:\\icc with your installation root if you have installed ICCAVR in anything other than the default directory)

3. Setting up the drivers
i. For a Parallel Port Dongle
- Type 'setupdrv /par\'

ii. For a USB Port Dongle
- Type 'setupdrv /usb\'

*** Please Note ***
You must have administrative privileges to install the drivers.

4. Testing the drivers
After driver installation, attach the dongle and reinvoke the Imagecraft ICCAVR IDE.
On some systems, you may need to reboot.
The dongle must be attached when compiling and building. See Winhelp file for details.

 
 

Device Support (by family)

 
 
This product supports devices from the families listed below:
 
Atmel (Microchip):
  • AT90CAN - AVR with on-chip CAN : AVR microcontroller with on-chip CAN
  • AT90PWM - AVR Microcontroller Family
  • AT90S AVR  - FLASH Microcontroller Family
  • AT90USB - AVR FLASH Microcontroller Family
  • ATmega AVR - FLASH Microcontroller Family
  • ATmegaxxxP 'PICO Power' AVR Microcontroller Family
  • ATtiny AVR - FLASH Microcontroller Family

 

Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.

 
 

Ordering Information...

 
 
 
USB Dongle for Imagecraft JumpStarter C V8 - STANDARD Version
This USB Dongle for the Imagecraft JumpStarter C V8 STANDARD Version allows you to install the compiler on as many computers as you like.
Manufacturer:  Imagecraft
Order Code:  ICCAVRV8-STD-DONGLE-USB
Discontinued Product

For further information about related products, please see the Overview Product.

Product Information
Product:  USB Dongle for Imagecraft JumpStarter C V8 - STANDARD Version
Manufacturer:  Imagecraft
Order Code:  ICCAVRV8-STD-DONGLE-USB
Discontinued Product
 
 
Overview Product
JumpStarter C Version 8 - C Compiler Tools Suite for Atmel AVR Microcontrollers >>
 
 
Device Support
Device Support List
 
 
Downloads
Download View Downloads for this Product
 
 
Associated Products View All
Atmel AVR Microcontroller Tools
JumpStarter C Version 8 - C Compiler Tools Suite for Atmel AVR Microcontrollers >>
Compilers / Assemblers
JumpStarter C Version 8 - C Compiler Tools Suite for Atmel AVR Microcontrollers >>
Key Products
JumpStarter C Version 8 - C Compiler Tools Suite for Atmel AVR Microcontrollers >>
                                                             Home  |  Contact Us  |  Privacy Policy  |  Refund Policy  |  Delivery Policy

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2023 Equinox Technologies (UK) Ltd.