 |
|
Phyton PICE-MC - Emulator - Main Board |
|
|
|
|
|
|
The Main Board for PICE-MC In-circuit Emulator (ICE) emulates many different Microchip PIC microcontrollers. There are several types of the main boards that differ in the suffix following the part number MR1-MC-. This suffix defines the speed and memory size. The most common part number is MR1-MC-01 and the PICE-MC Emulator is based on this main board.
The MR1-MC-xx Main Board uses the Altera® re-programmable ACEX PLD, which makes it possible to fit the functions of hundreds of glue logic chips into a one-square-inch piece of silicon. This approach improves reliability and dramatically reduces the emulator size without compromising features and performance. A few glue logic chips, memory chips, and a master microcontroller that handles communications to a host PC and reprogramming the ACEX unit, represent other components set on the Main board.
The Main Board has three connectors on the top. One, marked "LNK" is intended for connecting a link cable going to a PC serial port. This is a mini-USB type connector. The second one, marked as "TRACER" in intended for connecting a flat trace cable TC-R1 with micro hooks at the ends of the cable wires. The cable allows entering up to 8 external signals and outputting up to four triggers to synchronize an oscilloscope, logic analyzer or other lab equipment. The third coaxial socket is intended for applying power to the ICE unit (3.3V, regulated, center positive).
The Main Board has two connectors on the bottom to stack it with one of the POD that carries an execution (emulating) processor. |
|
|
 |
It provides all major emulator functions including: |
|
- Communication to a host PC
-
Non-intrusive control of the emulating POD;
-
Breakpoint processing
-
Dual-port memory operations
-
Memory shadowing and on-the-fly access to the ICE resources
-
Trace recording
-
Clock setting
-
Time measurement
|
|
|
Device Support (by family) |
|
|
|
|
|
This product supports devices from the families listed below: |
|
|
|
Please note: Not all devices may be supported within a family. Please see the Detailed Device Support List for a list of all devices which the product supports.
|
|
For further information about related products, please see the Overview Product.
|
Component Products |
The available Main Boards for this Emulator are listed in the table below: |
|
|  |
|