| |
Grifo - TBO xx (Transistor BLOCK Output) TTL Module |
|
|
|
|
|
| |
The TBO 01 (Transistor BLOCK Output) is a BLOCK type module designed which supports 16 x opto-coupled control channels. The inputs are open collector transistor type with one for each output.
The inputs and power supply of TTL section are connected to a standard 20 pins I/O ABACO® connector allowing to interface the several grifo® cards, provided of at least 16 TTL output lines, like GPC® 150, GPC® 552, GPC® 15R, GPC® 188F, PIO 01, IPC 52, GPC® 154, GPC® 884, GPC® 323, GPC® 183, etc. The module connection with these cards is directly performed with a 20 wires flat cable, as the FLT 20+20 or FLT 26+20 accessories.
The sixteen 3 A transistor outputs are available on two 12 pins quick release screw terminal connectors, that allows a prompt interface to the external signals. Remarkable and really efficient is the protection offered by back suppression diodes on the power transistors, especially usefull in case of inductive loads: to take advantages from this feature it is sufficient the connection of positive supply voltage of the loads always on the described connectors.
The typical applications of the module are all the on/off driving of small and medium power devices (electric valves, power relays, signal buffers, electric locks, etc.) through comfortable and inexpensive TTL I/O lines, without using dedicated digital cards.
The board features red LEDs that provide the user a visual feed back about the status of the 16 signals of the TBO 01 module.
TBO 01 is delivered with a plastic mount for DIN 46277-1 and DIN 46277-3 rails and it doesn't require any software management.
|
| |
|
|
 |
Specification |
|
- Conversion interface for 16 TTL digital signals to 16 transistors outputs.
-
Dimension: 170x72x45 mm, complete of plastic container.
-
Plastic support container for DIN 46277-1 and DIN 46277-3 rails.
-
Optocoupled 3 A, open collector transistor outputs, up to 45 Vdc for a continuos power load of 1,25 W at room temperature.
-
Suppression diodes that can be connected to protect the transistors.
-
Two 12 pins quick release screw terminal connectors, for transistors outputs and positive of the loads.
-
One 20 pins low profile connector with normalized I/O ABACO® pin out, for 16 TTL signals and relative +5 Vdc power supply voltage.
-
16 LEDs that show the outputs status.
-
Evident area for user identification code.
-
Consumption on +5 Vdc of TTL section = 150 mA.
|
| |
 |
Grifo - TBO 01 (Transistor BLOCK Output) TTL Module - 16 channel
The TBO 01 (Transistor BLOCK Output) is a BLOCK type module is a 16 channel Digital I/O Expansion Module with 16 x TTL open collector transistor type inputs and 16 x opto-coupled outputs with 3 A drive capability.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
|
Grifo - TBO 08 (Transistor BLOCK Output) TTL Module - 8 channel
The TBO 08 (Transistor BLOCK Output) is a BLOCK type module is a 8 channel Digital I/O Expansion Module with 8 x TTL open collector transistor type inputs and 8 x opto-coupled outputs with 3 A drive capability.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
|  |
|
|
|
|
|
