| |
TRP-C08 - USB to RS-232/422/485 Isolated Converter |
|
|
|
|
|
| |
The TRP-C08 is a USB to RS232 / RS422 / RS485 serial convertor module. A PC controls the module via the USB port allowing it to automatically configure RS-232, RS-422 or RS-485 signals to a specified baud rate without any external switch settings.
The module is rated at 3KV DC and features internal surge-protection on all data lines to protect the host computer and converter against high voltage spikes as well as ground potential differences. It features a high-speed 256 Kb/s transmission rate and supports various operating systems. The industry standard DIN rail and panel mounting design provides for quick mounting within a DIN rail panel. |
| |
|
|
|
 |
Features |
|
- Full compliance with the USB V1.0 and 2.0 specification
-
System gets 1 x COM port when the converter is connected
-
Auto data format detecting
-
Auto direction flow control on RS-485
-
Auto baud rate switching from 300bps to 115.2 Kbps
-
256 byte buffer for upstream and downstream data flow
-
Direct power from USB port , no external power necessary
-
3000V DC isolated protection
-
Surge protection on RS422/485 data lines
-
Power/TX/RX mode LED indicator
-
DIN rail or panel mount support
-
Driver support: Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS
-
Module is powered from USB port (no external power supply required)
|
|
Specifications |
|
- USB interface: Fully compliant with V1.0, 2.0 specification
-
USB to serial bridge controller; Prolific PL2303HX
-
RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND)
-
RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
-
RS-485 signal: Differential 2 half-duplex wires (D+, D-)
-
Data Format: Asynchronous data with all common combination of bits, parity, stop
-
Parity type: None, odd, even mark, space
-
Data bit: 5, 6, 7, 8
-
Stop bits: 1, 1.5, 2
-
Cable: USB type A to type B
-
Communication speed: form 300bps to 256Kbps
-
RS-422/485 line protection: Against surge, short circuit, and voltage peak
-
Transmission distance: RS-422/485 Up to 4000ft (1200M)
-
Connection type: Screw terminal accepts AWG #12~30 wires
-
Signal LED: Power on, TX, RX
-
Direct power from USB port
-
Power consumption: 1.2W
-
Isolation voltage: 3000V DC
-
Operating environment: 0 to 60℃
-
Storage temperature: -20 to 70℃
-
Humidity: 10-90% Non-condensing
-
Dimension: 151mm X 75mm X 26mm
-
Weight: 375g
|
| |
 |
TRP-C08 - USB to RS-232/422/485 Isolated Converter
The TRP-C08 allows connectivity of serial devices to systems by using a USB interface. It is able to automatically configure RS-232, RS-422 or RS-485 signals to baud rate without an external switch setting.
Discontinued Product
|
|  |
| Product Information |
| TRP-C08 - USB to RS-232/422/485 Isolated Converter |
| Trycom Technology |
|
TRP-C08 |
| Discontinued Product |
|
|
View Downloads for this Product
