| |
Atmel STK503 - Adaptor/Dvpt Board for the Atmel 100-pin ATmega 2560/1280/640 AVR FLASH Microcontrollers |
|
|
|
|
|
| |
The STK503 is a plug-in Expansion Module for the Atmel STK500 Start Kit. The module features a 100-pin ZIF socket suitable for accepting samples of the Atmel 100-pin ATmega 2560/1280/640 AVR FLASH Microcontrollers.
Allof the new features of the ATmega128 device are supported including extra I/O ports, JTAG port and additional serial USART. The STK503 can be controlled from the STK500 via ‘AVR Studio’ or the ‘JTAG ICE’ can be plugged into the JTAG port and then used to program/debug the target ATmega device. |
| |
|
|
 |
Compatible with STK500 Module |
|
- Plugs into expansion headers on STK500 module
-
Allows the Atmel ATmega 2560, 1280 and 640 microcontrollers to be programmed
|
|
Allows programming / evaluation of Atmel ATmega 100-pin TQFP microcontrollers |
|
- Quality 100-pin 'Zero Insertion Force' (ZIF) Socket supports ATmega1280, 2560 and 640 devices in TQFP-100 package without soldering (devices not included)
-
Supports programming of Atmega device via SPI, JTAG (using ‘JTAG ICE’ or ‘Epsilon5’) and high-voltage parallel mode
-
JTAG ICE compatible (JTAG port provided to interface to JTAG-ICE)
-
TQFP footprint to allow emulator (ICE) adaptor to be soldered to the module
-
Supports all new features of the ATmega devices including extra I/O ports, JTAG port and additional serial USART
-
Port connectors for ports E, F, G, H, J, K, L
-
Adds external XRAM support to the STK500 board
-
On-board RS232 convertor (supports 1.8 to 5.5V operation)
-
On-board 32kHz Crystal for easy implementation of a Real-time Clock
-
On-board Address Latch for easy connection to memory and peripheral devices
-
Supports High-Voltage Parallel Programming through STK500 board
|
| |
| |
Device Support (by family) |
|
|
|
|
|
| This product supports devices from the families listed below: |
| |
Atmel (Microchip):
-
ATmega AVR - FLASH Microcontroller Family
|
| |
Device Support (by manufacturer / programming algorithm) |
|
|
|
|
| Atmel Corporation | | | | LVISP - Low Voltage SPI - Serial Programming Algorithm: | | ATmega AVR - FLASH Microcontroller Family: | | ATmega103, ATmega103L, ATmega128, ATmega128L, ATmega169, ATmega64, ATmega64L | | | | JTAG - In System Programming (ISP) via JTAG Debug Port (chargeable upgrade for Equinox Programmers): | | ATmega AVR - FLASH Microcontroller Family: | | ATmega169, ATmega64, ATmega64L | | | | PAR - Parallel (off-board) Programming Algorithm: | | ATmega AVR - FLASH Microcontroller Family: | | ATmega103, ATmega103L, ATmega128, ATmega128L |
|  |
|
View Downloads for this Product
