 |
| |
Micro-ISP Series IV LV (3.0 - 5.0V) - ISP Programmer for Atmel AVR and 8051 Microcontrollers |
|
|
|
|
|
| |
Supports In-System Programming (ISP) of the following microcontroller families:
| Atmel AT89S/AT89LS (8051+ISP) |
| Atmel AT90S (AVR) |
| Atmel ATmega (AVR) |
| Atmel ATtiny (AVR) |
|
Supports ISP down to 3.3V (LV version only)
Powerful ‘MERIDIAN’ programmer interface software
- Compatible with Windows 95, 98, 2000 and NT
- Device commands include Device Check Signature, Blank Check, Erase, Read, Write, Verify, Security, Auto-program
- Powerful buffer system with Blank Check, Erase, Fill, Goto and Checksum commands
- Supports reading and writing of target device fuse bits
- Supports reading and writing of target device lock bits
- Supports Binary and Intel HEX file formats
- User-configurable
- RESET polarity
- RESET timing state machine
- SPI Frequency
- FLASH and EEPROM Write Times (LV version only)
- EEPROM contents can be saved to buffer/file before a Chip Erase operation
- FLASH/EEPROM Buffer CRC Checksum
- Context-sensitive help system
Supports ATmega163 programming:
New multiple re-try FLASH page programming algorithm
Supports configuration of Oscillator Selection Fuses (CKSEL)
Oscillator may be swapped from Internal RC to an External source
Supports Equinox 10-way ISP Header as standard (includes SCK2 pin for ATmega163 external oscillator signal suppport)
Supports Atmel 10-way ISP Header using an 'ISP Cable Convertor' supplied with the system. Field upgradable firmware via Internet downloadable utility - caters for new programmer algorithms in the future
Programmer ‘Active’ signal - used to drive an LED on the target system
Connects to spare PC COM (serial) port
Robust 'EMC-friendly' design plus I/O pin protection
Dialog box for setting the target write times |
| |
| |
Device Support (by family) |
|
|
|
|
|
| This product supports devices from the families listed below: |
| |
Atmel (Microchip):
-
AT89(L)S - 8051 FLASH Microcontroller Family
-
AT90S AVR - FLASH Microcontroller Family
-
ATmega AVR - FLASH Microcontroller Family
-
ATtiny AVR - FLASH Microcontroller Family
|
| |
|
Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.
|
| |
This product has now been formally discontinued by Equinox. Equinox will endeavour to update the Meridian Driver Software on a regular basis to add any new devices which the programmer is capable of supporting. The replacement product for the Micro-ISP Series IV is the Epsilon5 programmer. This new programmer features more device support, faster programming times and the ability to operate in Standalone Mode. The ISP Header pin-out is identical between the Micro-ISP and the Epsilon5 - Equinox Header so no Target Board redesign is required to use the new programmer.
For further information about related products, please see the Overview Product.
|  |
| Product Information |
| Micro-ISP Series IV LV (3.0 - 5.0V) - ISP Programmer for Atmel AVR and 8051 Microcontrollers |
| Equinox Technologies |
|
UISP-LV4 |
| Discontinued Product |
|
|
View Downloads for this Product
