- MCU: AT91SAM7X256 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash, 64K Bytes RAM, CAN, USB 2.0, Ethernet 10/100, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), 2x SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 55 MHz operation
-
Standard JTAG connector with ARM 2x10 pin layout for Programming/debugging with ARM-JTAG
-
NOKIA 6610 128x128 TFT 12 bit COLOR LCD with back light
-
Ethernet 10/100 PHY with KS8721BL
-
USB connector
-
Two channel RS232 interface and drivers
-
SD/MMC card connector
-
Joystick with 4 direction and push action
-
Two buttons
-
Audio in and Audio Out jacks for microphone and headphones
-
On board Speaker with volume control potentiometer
-
Trimpot connected to ADC
-
Thermistor connected to ADC
-
On board voltage regulator 3.3V with up to 800mA current
-
Single power supply: 6V AC or DC required, board can take Power from USB port too
-
Power supply LED
-
Power supply filtering capacitor
-
RESET circuit , RESET button
-
18.432 Mhz crystal on socket
-
Extension headers for all uC ports
-
PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen Component print
-
Dimensions: 128 x 98 mm (5 x 3.8")
|
