Currency:
 
0  Item(s)
Your Account |
  HomeProductsSearchNewsHow To OrderDistributorsContact UsdownloadsCustomer
Order Information | Features | Associated Products | Downloads
 

I/O Connector Module 11 - ATE RELAY Interface

 
 
 

ATE / ICT Relay Isolation Module for PPM3-MK2 and PPM4-MK1 Programmers

The I/O Connector Module 11 is a 'Relay Isolation Module' for either the PPM3-MK2 or PPM4-MK1 programmer. This module is designed to be used when the programmer is to be integrated into a Test Fixture and an external ATE system also needs to control the same 'programming pins' as the programmer. All programmer I/O and power signals can be isolated from the Target System / ATE allowing the programmer to be taken completely out of circuit during ATE or functional testing.

Using the I/O Connector Module 11, it is possible to interface either the PPM3-MK2 or PPM4-MK1 programmer to any In-circuit Tester (ICT) or functional test systems (ATEs) including Agilent, Genrad, Teradyne, SPEA and TRI. The programmer features specially developed firmware which counts the number of activations of the relay coils and warns when the relays need to be replaced.

 
 

Features

 
 
Plugs into I/O Connector on PPM3-MK2 or PPM4-MK1 programmer
Main Features
Isolates all programmer signal and power lines via relays

Plugs into I/O Connector on PPM3-MK2 or PPM4-MK1 programmer

Main Features
  • Designed to allow easy integration of  the programmer with any In-circuit Tester or Functional Test System (ATE)
  • Allows a PPM3-MK2 or PPM4-MK1 ISP programmer to be galvanically isolated from a Target System
  • All programmer I/O lines are isolated from the Target System via high quality relays
  • Programmer Power and GROUND signals are isolated from the Target System via high quality relays
  • Compatible with most ATE systems including Agilent, Genrad, Teradyne, SPEA and TRI

Isolates all programmer signal and power lines via relays
  • All programmer I/O lines (SPI, JTAG, I2C) are isolated via relays.
  • The Target Vcc and GROUND signals are isolated via relays.
  • The relays are NORMALLY OPEN (NO) so the programmer is isolated from the Target System as standard.
  • The relay coils can be controlled either by the programmer or an external signal from e.g. an ATE.

 
 

Ordering Information...

 
 
 
I/O Connector Module 11 - ATE RELAY Interface
The I/O Connector Module 11 plugs into either the PPM3-MK2 or PPM4-MK1 programmer and provides relay isolation of all programming and power signals. This allows the programmer to be completely isolated from an ATE.
Manufacturer:  Equinox Technologies
Order Code:  EQ-IOCON-11
Quantity Price (GBP) [Excl. VAT]
1 - 2
185.00
3 and above
166.50

Availability:
0 in stock
30 days delivery
Product Information
Product:  I/O Connector Module 11 - ATE RELAY Interface
Manufacturer:  Equinox Technologies
Order Code:  EQ-IOCON-11
Availability:  0 in stock
30 days delivery
Price:   185.00 (GBP)
 [Excl. VAT]
 
 
Downloads
Download View Downloads for this Product
 
 
Associated Products View All
8051 Microcontroller - Support Tools
PPM3 MK2(UN) - Production ISP Programming Module >>
PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW >>
Atmel AVR Microcontroller Tools
PPM3 MK2(UN) - Production ISP Programming Module >>
PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW >>
Programmers
PPM3 MK2(UN) - Production ISP Programming Module >>
PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW >>
Other Hardware Tools
I/O Connector Module 1 (SPI) - Fast Connect Version >>
I/O Connector Module 2 (SPI) - Wire-wrap version >>
Key Products
PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW >>

Tel: +44 (0)1942 841975 Fax: +44 (0)1942 844181 email: info@equinox-tech.com
Registered in England 3358185: VAT Reg no GB 633 9814 19
© 1995-2019 Equinox Technologies (UK) Ltd.