Phyton PICE-MC - POD for Microchip PIC Microcontrollers
The POD is a board that carries an execution (slave) processor that emulates a behavior of the target MCU being under control of an application program and the PICE command. The PR1-MC- xx PODs are based on special Microchip ME "bondouts". The PICE main board controls a behavior of the ME chip, i.e. it can stop and start its real-time running and can read contents of some internal resources (RAM, registers, timers, etc.) when the execution processor is halted.
Besides the execution (emulating) processor each POD has a few logic chips, two connectors on the top to connect it to the Main Board and two connectors on the bottom to connect it to the mating Package Adapter.
The POD abbreviation includes (from left to right):
"P" - POD
"R1" - main board abbreviation
"MC" - target microcontroller family code
"xx" - POD Group Code e.g. "84", "77", "877", "184", etc.
If one POD enables setting different emulating chips on it (manualy, without usage of special tools) the POD group code follows another dash sign and a code of the particular emulating chip installed on the POD: "-711", "-84". Only a few PR1-MC PODs enables setting distinct emulating chips on them. Here are some examples of the PODs: PR1-MC-17, PR1-MC-84-711.
To find the PR1-MC-xx PODs available, click the [More Info] link at the top of the page.
Features
Main Features
Carries an execution (slave) processor that emulates a behavior of the Target Microcontroller This in turn is controlled by an application program and the PICE-MC software.
PR1-MC-xx PODs are based on special Microchip ME "bondout chips"
PICE-MC PC Application control of POD Microcontroller
Stop and Start microcontroller in real-time
Read contents of some internal resources (RAM, registers, timers, etc.) when the execution processor is halted
Device Support (by family)
This product supports devices from the families listed below:
Please note: Not all devices may be supported within a family. Please see the Detailed Device Support List for a list of all devices which the product supports.
For further information about related products, please see the Overview Product.
List of available PODs:
The following Adaptors are available for the PICE-MC Emulator.
Phyton POD 4620 for the PICE-MC PIC Emulator
The Phyton PIC Microcontroller POD allows emulation of the Microchip 18F4620 microcontroller plus the following other devices: PIC18F2410/2420/2510/2515/2520/2525/2610/2620/4410/4420/4510/4515/4520/4525/4610