 |
| |
Xeltek SuperPro280U - High-speed Universal Device Programmer (USB Interface) |
|
|
|
|
|
| |
| The Xeltek Superpro280U is a high-speed Universal Programmer which supports over 11,700 programmable devices from up to 100 IC manufacturers including EPROMs, EEPROMs, Flash memories, CPLDs, PALs and GALs. The programmer features a 48 pin ZIF (Zero Insertion Force) socket and 48 pin Universal Pin Driver Technology allowing it to program up to 48 pin devices in DIL (Dual In Line) package without requiring any adapors. Other package types are supported by using the relevant Package Adaptor. The 280U Programmer connects to the controlling PC via a high-speed USB link. This makes the programmer ideal for use with newer laptops which do not have a Parallel Port. |
| |
|
|
 |
Device Support |
|
|
Supports more than 11,700 programmable devices from over 100 IC Manufacturers
Programs EPROMs, EEPROM's, FLASH Memories etc.
Programs many microcontrollers including Microchip PIC's, Atmel AVR etc.
Supports DIL (Dual-in-line) devices with up to 48-pins
|
|
ZIF Socket - Supports up to 48-pin DIL devices |
|
|
The SuperPro 3000U programmer features a 48-pin DIL (Dual-In-Line) ZIF (Zero Insertion Force) socket with 48 independent pin-drivers. The 48-pin ZIF socket allows the 3000U to support many more devices than the more traditional 40-pin programmers on the market including high-density FLASH and EEPROM Memory devices which are common in 48-pin TSOP packages. Many of the more recent high-integration microcontrollers also require more than 40pins for programming. A suitable Package Adaptor is required to convert the package of the target chip to the DIL equivalent.
|
|
48-pin Universal Pin-driver technology |
|
- The programmer features a Universal Pin-Driver for each of the 48 pins of the ZIF socket.
-
No adaptors are required for DIL (Dual-in-Line) devices as every pin can be driven by the programmer.
-
The same universal adaptor can be used to support any device with up to 48-pins eg. PLCC-44, TSOP-48 etc.
-
The Universal Pin-Driver technology supports direct interfacing to devices down to 1.5V.
|
|
USB connection to the PC |
|
|
The programmer connects to the PC via a high-speed USB connection giving the fastest possible data transfer rates for programming / reading data from target IC's.
|
| |
This product has been discontinued. Please refer to the Replacement Product instead:
|  |
| Product Information |
| Xeltek SuperPro280U - High-speed Universal Device Programmer (USB Interface) |
| Xeltek |
|
XEL-Superpro280U |
| Discontinued Product |
|
|
View Downloads for this Product
