 |
| |
ComPOD12 Next Generation - BDM ISP Programmer for Freescale HC(S)12 Microcontrollers |
|
|
|
|
|
| |
The ComPOD12 BDM-Interface is a universal In-System Programming (ISP)device for downloading firmware / data to a Freescale HC(S)12 Target System. The programmer connects to the Target Device 'BDM Port' on the Target System using a 6-pin ribbon cable fitted with a BDM12 6-pin header connector as defined by Motorola. Power supply for the pod also comes over this connection from the target board.
The ComPOD12/NG BDM-Interface provides all features of the COMPOD12/PRO version, plus a number of powerful extensions:
- Support of Low-Voltage HCS12 types (VCC=3..5V)
- Faster data transfer
- BDM-clock continuously adjustable between 250kHz and 40MHz!
The programmer driver software, StarProg, allows the Target Device FLASH and EEPROM memory areas to be programmed under PC control. The software makes use of the hardware interface ComPOD12 to access the target hardware. The connection to the PC is established via RS232. |
| |
|
|
 |
Overview |
|
- Programmer for In-System Programming (ISP) of Motorola HC(S)12 Microcontrollers
-
Supports programming of FLASH and EEPROM areas of Target Device
-
Powerful PC Driver Software - StarProg
|
|
ISP (BDM) Interface |
|
- Connects to BDM (Background Debug Mode) Port of Target Device
-
Programmer is connected to the target board using a ribbon cable with a BDM12 6-pin header connector as defined by Motorola.
-
Power supply for the pod also comes over this connection from the target board
|
| |
| |
Device Support (by family) |
|
|
|
|
|
| This product supports devices from the families listed below: |
| |
Freescale:
-
HC12 FLASH Microcontroller Family
-
HCS12 FLASH Microcontroller Family
|
| |
|
Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.
|
| |
For further information about related products, please see the Overview Product.
|  |
|
