| |
GMB HR84 - grifo® Mini BLOCK - Housing, 8 x Opto-Inputs, 4 x Relay Channels + RS422 |
|
|
|
|
|
| |
Associated Products...
 |
AMP Cable Assemblies - 2 / 4 / 8 / 16 Wire Crimped AMP Cables
|
 |
AVRISP MK1 - Low-cost In-System Programmer for Atmel AVR FLASH Microcontroller Family (Serial Port version)
Low-cost In-System Programmer for Atmel AVR FLASH Microcontroller Family
Discontinued Product
|
 |
Controller Area Network (CAN) - grifo® Mini Module Zero
This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH, 2.2K RAM, 2K FLASH for Bootloader, 2K EEPROM, 3 x Timer Counters and 5 x Programmable Counter Array channels (for PWM, watch dog, compare, capture), RTC + 240 Bytes SRAM, Lithium Battery Backup, I2C BUS, 22 x TTL I/O lines, 8 A/D 10 bits, RS 232 or TTL, CAN, 2 x status LEDs, configuration dip switches, etc.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
 |
Controller Area Network (CAN) - grifo® Mini Module 1
This CAN Mini Module has a 28 pin connector and is based on the Atmel T89C51CC01 CPU with 32K FLASH, 256 Bytes RAM, 1K ERAM, 2K FLASH for Bootloader, 2K EEPROM, 3 x Timers Counters and 5 x Programmable Counter Array channels (for PWM, watch dog, compare, capture), RTC + 240 Bytes SRAM, Lithium Battery Backup, I2C BUS, 22 x TTL I/O lines, 8 x A/D 10 bits, RS 232 or TTL, CAN, 2 x status LEDs, configuration dip switches, etc.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
 |
Controller Area Network (CAN) - grifo® Mini Module 2
This CAN Mini Module has a 28 pin connector and is based on the Atmel T89C51CC02 CPU with 16K FLASH, 256 Bytes RAM, 256 Bytes ERAM, 2K FLASH for Bootloader, 2K EEPROM, 3 x Timer Counter and 2 x Programmable Counter Array channels (for PWM, compare, capture), RTC + 240 Bytes SRAM, Lithium Battery Backup, I2C BUS, 18 x TTL I/O lines, 8 x A/D 10 bit, RS 232 or TTL, CAN, 1 x status LED, configuration dip switches, etc..
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
 |
EPSILON5 MK3 - Portable high-speed USB In-System (ISP) Programmer (standard version)
Epsilon5 MK3 - Portable high-speed In-System (ISP) Programmer with Standalone capability and USB / RS232 connectivity. Supports Atmel AVR via SPI interface only. Also supports some Atmel /NXP 8051 & Zensys ZWxx devices.
Discontinued Product
|
 |
grifo® - GMM AM08 - Mini Module - ATmega8L
This grifo® Mini Module has a 28 pin connector and is based on the Atmel ATmega8L CPU with 8K FLASH, 1K SRAM, 512 Byte EEPROM, 3 x Timer Counter and 2 x Programmable Counter Array channels, 3 x PWM, 8 x A/D, 1 x Comparator, I2C BUS, Master/Slave SPI Serial Interface, 23 x TTL I/O lines, RS 232 or TTL, 1 x status LEDs, etc.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
 |
grifo® - GMM AM128 - Mini Module ATmega128
This grifo® Mini Module has a 40 pin connector and is based on Atmel ATmega128L CPU with 128K FLASH, 4K SRAM, 4K EEPROM, 3 x Timer Counter, 7 x PWM, 8 x A/D, 1 x Comparator, RTC + 240 Bytes SRAM, Lithium Battery Backup, I2C BUS, Master/Slave SPI Serial Interface, JTAG Interface, 36 x TTL I/O lines, 2 x RS 232 or TTL, 2 x status LEDs.
| Quantity |
Price (GBP) [Excl. VAT] |
| 1 and above |
|
|
|
|
|  |
|
