- MCU: LPC2103 16/32 bit ARM7TDMI-S™ with 32K Bytes Program Flash, 8K Bytes RAM, RTC, 2x UARTs, 2x I2C, SPI, 5x 32bit TIMERS, 8x 10bit ADC, CCR, PWM, WDT, 5V tolerant I/O, up to 70MHz operation
-
ARM JTAG 2x10 pin connector
-
extension header for uC pins
-
14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
-
32768 Hz crystal
-
RS232 interface circuit
-
User button
-
Status LED
-
Power supply LED
-
RTC backup Li-ion battery
-
RESET circuit
-
RESET button
-
DEBUG jumper for JTAG enable/disable
-
BSL jumper for bootloader enable/disable
-
RTCK pullup resistor
-
Push BUTTON with pullup
-
Power plug-in jack
-
Single power supply: +6VAC or 9VDC
-
Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
-
Power supply filtering capacitor
-
UEXT universal extension connector
-
PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
-
Prototype PCB area with +3.3V and GND bus
-
Dimensions: 100x80 mm (3.9x3.15")
-
Four mounting holes
|