- MCU: LPC2124 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
-
Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
-
Three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
-
Single power supply: +7-9VDC required
-
Power supply status LED
-
Power supply filtering capacitor
-
Two channel RS232 interface with two RS232 SUB-D 9 pin connectors
-
iButton interface circuit
-
Frequency input connector
-
Two buttons
-
Two status LEDs
-
Potentiometer connected to AIN
-
RESET circuit with exterman control of Philips ISP utility via RS232
-
RESET button
-
DBG jumper for JTAG enable
-
BSL jumper for bootloader enable
-
JRST jumper for enable/disable external RESET vontrol by RS232
-
14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
-
Extension headers for all uC ports
-
PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
-
Dimensions: 115x80 mm (4.5x3.2")
|
