- MCU: LPC2138 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 32K Bytes RAM, RTC, 8x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
-
Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
-
On board voltage regulator 3.3V with up to 800mA current
-
Single power supply: 6V AC or DC required
-
Power supply LED
-
Two status LED
-
Power supply filtering capacitor
-
Two channel RS232 interface
-
Li-ion 3V battery holder
-
RESET circuit with exterman control of Philips ISP utility via RS232
-
RESET button
-
Two user buttons
-
Two RS232
-
DBG jumper for JTAG enable
-
BSL jumper for bootloader enable
-
JRST jumper for enable/disable external RESET vontrol by RS232
-
14.7456 Mhz crystal on socket, allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
-
32768 Hz crystal and RTC backup battery connector
-
Extension headers for all uC ports
-
PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
-
Dimensions: xx x yy mm (x")
|
