|
|
|
 |
Supports PC Controlled and Standalone Programming |
|
- Development Mode - using Equinox Development Suite (EDS) under PC control
-
Standalone Mode - ideal for field or small-scale production use (no PC required)
|
|
Main features |
|
- Fastest programming times possible due to on-board data, high-speed SPI and JTAG port
- Supports programming of FLASH, EEPROM, FUSE bits, Security bits and RC Oscillator Calibration bytes
- 2Mbits of on-board non-volatile FLASH memory for user project storage (Standalone Mode)
- SCK2 Oscillator signal for externally clocking ATmega & ATtiny microcontrollers during programming
- On-board +12V Vpp generator for programming Atmel ATtiny11/12/15 microcontrollers in 'High voltage Serial Mode'
- JTAG Port - FAST ISP using JTAG algorithm (license upgrade)
|
|
Controlled / configured by Equinox EQTools Software |
|
- Equinox Development Suite (EDS)
- Project Builder - to create/edit Programming Projects
- Project Manager - to create and maintain Project Collections
- Project Upload / Download Utility - to upload projects to the programmer for use in Standalone Mode
|
|
Supports all popular ISP Headers to connect to the Target System |
|
- Atmel 10-way SPI Header (as per STK200 / STK500)
- Atmel 6-way SPI Header
- Equinox 10-way SPI header with support for Slave Select & SCK2
- Atmel 10-way JTAG header (as per Atmel JTAG-ICE)
- Equinox 10-way UART header for Atmel T89C51Rx2 (8051) and Philips P89C51 ISP FLASH microcontrollers
|
|
Features of AT91SAM7 Device Library |
|
- High-speed In-System Programming (ISP) support of Atmel AT91SAM7 microcontrollers
-
Programs the on-chip FLASH Memory of AT91SAM7 devices
-
Uses standard ARM JTAG port as the ISP interface
-
Very high-speed programming due to local data storage and optimised programming algorithms
-
Programmers can be used in "Standalone Mode" (no PC) - Up to 64 SAM7S Programming Projects can be stored inside an FS003, PPM3-MK2 or PPM4-MK1 programmer
-
Supports high-speed program / verify of the on-chip FLASH in a singe operation.
-
Optimised Erase operations blanks the on-chip FLASH in less than 200ms
-
Supports programming of non volatle Fuse Bits
-
Supports blowing of the "Security Fuse" to protect code from being read out
|
|
AT91SAM7 ISP Connections |
|
|
|
|
AT91SAM7 ISP Connector Cables for portable programmers |
|
|
A special AT91SAM7 ISP cable has been developed which connects between an Equinox portable ISP programmer and any SAM7 Target System.
|
| |
The following are available as chargeable upgrades: JTAG In-System Programming support for the Atmel ATmega AVR Family and 24Cxxx - Serial I2C EEPROM Memory Device Library. See [Upgrades] tab.
This product has been discontinued. Please refer to the Replacement Product instead:
View Downloads for this Product
