|Equinox announce ISP support for Atmel AT90USB AVR Family|
Equinox Technologies are pleased to announce high-speed In-System Programming (ISP) support for the entire Atmel AT90USB AVR Family on our range of development, field and production ISP programmers. The fastest SPI programming of these devices is guaranteed due to state-of-the-art algorithms and local storage of data on the programmer. Each programmer can also be upgraded to support high-speed JTAG programming which also offers the ability to program multiple AT90USB devices in a 'JTAG Chain' (JTAG Daisy Chain Mode).
AT90USB AVR microcontrollers are supported on the following Equinox programmers:
- Epsilon5 - Development / Field / Low volume production ISP programmer
- FS2003 - Field / low - medium volume production ISP programmer
- PPM3-MK2 - high volume production ISP programmer
To upgrade your existing programmer to support AT90USB AVR microcontrollers....
- Download and install EQTools Build 888 or above
- Upgrade your programmer firmware to version 3.07 or above
About AT90USB AVR microcontrollers....
The AT90USB family of microcontrollers features the powerful AVR core, FLASH Code Memory, EEPROM Data Memory plus an on-chip USB peripheral.
These devices can be used in a wide range of USB applications: high-end keyboards, mice, phone accessories, toys, serial adapters and industrial equipment. An on-chip bootloader permits very quick firmware download from a PC, without using a parallel programmer or dedicated hardware. Nonvolatile memory stores configuration parameters enabling the system to be instantly operational, even without connection to a PC.
Atmel AT90USB AVR Family (SPI):
The following AT90USB devices are now support in 'SPI' programming mode:
Atmel AT90USB AVR Family (JTAG):
The following AT90USB devices are now support in 'JTAG' programming mode: