ISP-PRO version IV supports all the features of Version 3 plus the following additional features:
Developed and tested under the latest Windows Vista and Windows 7 (32-bit and 64-bit) PC Operating Systems
On-going support and problem fixing only in ISP-PRO Version 4 (Version 3 no longer updated)
Supports the newer ISPnano Series IV, ISPnano-MUX2, ISPnano-MUX2 and ISPnano-MUX8 programmers
Supports high-speed “broadcast” programming commands speeding up programming of multi-PCB panels
New ‘Mutli-PCB Panel programming mode’ where all PCBs on a panel can be programmed concurrently with a single key-press or remote application trigger
Optimised scanning algorithm of multiple programmers yields much faster programming times for ‘multi-PCB panel’ programming
Supports user ‘Display Notes’ fields to give the production operator step-by-step instructions during a programming / test sequence
Features more robust / reliable multi-programming channel communications drivers
New communications driver supports user selection of 1 or 2 STOP-bit messages to improve the reliability in multi-channel programmers systems which are operated in noisy environments
New ‘FLASH Test’ utility supports ‘CRC data validity check’ of each ‘Standalone Programming Project’ at the commencement of a production run
Supports reading from and writing to ‘Motorola S-Record’ format files
Supports reading only an addressed segment within an Intel Hex or ‘Motorola S-Record’ file. This feature is required for programming many ARM devices where the FLASH may be memory mapped to a non-zero address.
Support for programming Atmel AT45DB Serial DataFLASH devices from data files or ‘Standalone Programming Projects’
Support for ISP-PRO Version 3 is no longer offered as we have now completely re-written the ISP-PRO application and released ISP-PRO Version 4. Equinox no longer offer any technical support or problem / bug resolutions for Version 3. It is therefore recommended that all customers using Version 3 upgrade to Version 4 if on-going technical support and software updates are required.
The main reasons to upgrade to ISP-PRO Version 4 are as follows:
Technical support and software updates / problem fixes are no longer available for ISP-PRO version 3
Full on-going technical support and software updates / problem fixes are available with ISP-PRO Version 4
ISP-PRO Version 3 will not run under the latest Windows 7 - 64-bit versions of Windows where as Version 4 has been designed and tested using the latest versions of the Windows 7 operating system.
Downloading ISP-PRO Version 4
To download the latest version of 'ISP-PRO Version 4' please select the link of the right-hand side of this page.