 |
| |
Development Parallel Programmer for 8051 microcontrollers and selected Atmel Memory Devices |
|
|
|
|
|
| |
The Micro-Pro Programming System is a low-cost parallel programming system designed for programming the on-chip FLASH / EPROM of many popular 8051 microcontrollers. Support is also offered for a limited range of Atmel Memory Devices including serial / parallel EEPROM’s and FLASH memories. A quality 40-pin Zero Insertion Force (ZIF) socket accepts Dual-in-Line devices with up to 40 pins. The programmer boasts very fast programming speeds due to it’s re-configurable FPGA design and fast parallel port data transfer method. It supports Dual-in-Line devices 40-pin ZIF socket.
The powerful Windows Interface Software, Micro-Pro for Windows, supplied with the programmer supports individual Code and Data Buffers, setting of Special Option Fuses and a device auto-program utility. |
| |
| The programmer is NOT compatible with Windows 2000, NT or XP. |
| |
|
|
 |
Programmer hardware |
|
- Supports programming of on-chip memory of many 8051 / 251 and Atmel AVR Microcontrollers
-
Supports programming of many Atmel Serial / Parallel EEPROM and FLASH Memories
-
Accepts 8 / 20 / 40 pin Dual-in-Line devices without adaptor
-
Connects to PC Parallel Port
-
Fast programming algorithms (many approved by manufacturer)
-
Field upgradeable hardware by virtue of FPGA architecture
-
Small physical size (9.5 x 8.0 cm)
-
Programmer is NOT in an enclosure and so must be used in an ESD controlled area
|
|
Programmer Driver Software |
|
- Powerful Programmer Interface Software for Windows
-
16-bit application only – compatible with Window 3.x, 95, 98, ME (NOT compatible with Windows 2000, NT4 or XP)
-
Supports both Code and Data Buffers
-
Supports Binary and Intel Hex files
-
Device commands include Device-Check Signature, Blank Check, Erase, Read, Write, Verify, Security, Auto-program
-
Powerful buffer system with Blank Check, Erase, Fill, Goto and Checksum commands
-
Supports reading and writing of target device fuse bits and lock bits
-
Context-sensitive help system
|
| |
| |
Device Support (by family) |
|
|
|
|
|
| This product supports devices from the families listed below: |
| |
Atmel (Microchip):
-
89C - 8051 FLASH Microcontroller Family
-
AT89(L)S - 8051 FLASH Microcontroller Family
-
AT90S AVR - FLASH Microcontroller Family
NXP (Philips):
-
P89C51Rx2 - 8051 FLASH Microcontroller Family
|
| |
|
Please note:
Not all devices may be supported within a family.
Please see the Detailed Device Support List for a list of all devices which the product supports.
|
| |
This product has been discontinued. Please refer to the Replacement Product instead:
| |
| Product Versions |
| This product is supplied with a Mains Power Supply Adaptor.
The pin-out, mains voltage and frequency of this adaptor is different for different regions of the world. Please select the correct Power Supply version of the product from the list below: |
| |
 |
Micro-Pro PLUS Programmer (EU)
Development Parallel Programmer for 8051 microcontrollers and selected Atmel Memory Devices + EU Mains Power Supply Adaptor: 2-pin plug, Input: 230V AC @ 50Hz, Output: 15V DC @ 120mA (unregulated)
Discontinued Product
|
|
Micro-Pro PLUS Programmer (UK)
Development Parallel Programmer for 8051 microcontrollers and selected Atmel Memory Devices + UK Mains Power Supply Adaptor: 3-pin plug, Input: 240V AC @ 50Hz, Output: 15V DC@ 120mA (unregulated)
Discontinued Product
|
|
Micro-Pro PLUS Programmer (US)
Development Parallel Programmer for 8051 microcontrollers and selected Atmel Memory Devices + US Mains Power Supply Adaptor: 2-pin plug, Input: 110V AC @ 60Hz Output: 15V DC @ 120mA (unregulated)
Discontinued Product
|
|  |
|
View Downloads for this Product
