15A DC Power cable - 2-way Power plug to bare ends (2m) This is a DC Power cable suitable for plugging into an Equinox 'ISPnano-PSU-10W' connector module. It is designed to provide the main power feed to a group of ISPnano programmers. Cable length: 200cm. Colour: Red / Black
ARM 10-way ISP Cable for Epsilon5, FS2003 & FS2009 programmers This cable allows an Equinox Epsilon5, FS2003, FS2009 or FS2009USB programmer to connect to any ARM Target System which features a 10-way 'ARM JTAG Debug Connector'. the relevant 'ARM Device Library' must also be purchased.
ARM 20-way ISP Cable for Epsilon5, FS2003 & FS2009 programmers This cable allows an Equinox Epsilon5, FS2003, FS2009 or FS2009USB programmer to connect to any ARM Target System which features a 20-way 'ARM JTAG Debug Connector'. the relevant 'ARM Device Library' must also be purchased.
DC Power cable - 2-way JST connector to bare wires (1.5m white) This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. One end of the cable is fitted with a 2-way JST connector and the other end is bare wires. Cable length: 1.5m. Colour: White
DC Power cable - 2.5mm Jack plug to bare tinned soldered ends (190mm) This is a DC Power cable with a 2.5mm jack plug on one end and bare tinned soldered wires on the other end. It is suitable for powering any Equinox programmer (except ISPnano) from an external lab power supply.
ISP Adaptor Cable for Phyton ChipProg Programmers This adaptor cable plugs into the 40-pin ZIF socket of the Phyton ChipProg Programmer range and brings out the pins to a ribbon cable. The cable can then be wired to a header on a Target Board to facilitate In-System Programming (ISP).
ISPnano DC Power cable - 2-way JST to 2-way JST connector - 40cm - black This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. Both ends of the cable are fitted with a 2-way JST connector. Cable length: 40cm. Colour: Black
ISPnano DC Power cable - 2-way JST to 2-way JST connector - 40cm - white This is a DC Power cable suitable for plugging into either the 'DC-IN' or 'EXT-IN' connectors on the ISPnano programmer. Both ends of the cable are fitted with a 2-way JST connector. Cable length: 40cm. Colour: White
RS485 Convertor - Cable Pack (5 x 0.5m RS485 Cables) Pack of 5 x 0.5m flat RS485 cables suitable for interconnecting Equinox PPM3-MK2 Programmer Modules via the RS485 Bus.Each cable is 0.5m long and terminated with an RJ45 connector.
RS485 Interconnect Cable for ISPnano programmers This cable is used to interconnect the RS485 signals between ISPnano programmers. It plugs into the RS485 In / Out connector on the ISPnano programmer.
Trace cable for any Phyton PICE Emulator system Optional Trace cable for any Phyton PICE Emulator system. Provides micro hooks for entering 8 ext. signals and outputting 4 triggers. Plugs into PICE unit.
