 | AT90USBKey2 - Demo board for evaluation of AVR microcontrollers and AT90USB family
The AT90USBKey2 is a low-cost demonstration board based on the AT90USB1287 microcontroller. It allows the quick evaluation of AVR microcontrollers and the AT90USB family. | AT90USBKey2
|
call
|
 | Brainboxes PX-157 - Parallel Port Printer Low Profile PCI Express Card
Parallel Port Printer Low Profile PCI Express Card | BRAIN-PX-157
|
call
|
 | Brainboxes PX-346 - PCI Express Card providing four RS422/485 serial ports.
PCI Express Card providing four RS422/485 serial ports. | BRAIN-PX-346
|
call
|
| Brainboxes PX-368 - PCIe 4xRS422/485 1MBaud Opto Isolated
PCIe 4xRS422/485 1MBaud Opto Isolated | BRAIN-PX-368
|
call
|
| Brainboxes SW-104 - Industrial Embeddable 4 Port Ethernet Switch
Industrial Embeddable 4 Port Ethernet Switch | BRAIN-SW-104
|
call
|
| Brainboxes SW-108 - Industrial Embeddable 8 Port Ethernet Switch
Industrial Ethernet 8 Port unmanaged switch | BRAIN-SW-108
|
call
|
 | CAN - grifo® Mini Modules - 8051 Core - Overview
Overview of CAN grifo® Mini Modules | GRI-CANMINIMOD-Overview
|
|
 | CAN232 - RS232 to CAN Converter Dongle
CAN Converter Dongle Plugs into any PC COM Port/RS232 | LAW-CAN232
|
call
|
 | CANUSB-V2 - Universal USB to CAN Interface Adaptor
This adaptor converts a USB serial datastream to a CAN serial datastream. | LAW-CANUSB-V2
|
call
|
 | ComPOD12 Overview Product - BDM ISP Programmer for Freescale HC(S)12 Microcontrollers
This page provides an overview of the various COMPOD12 - BDM12 In-System Programmer and Debugger options available for the Freescale HCS12 FLASH Microcontroller Family. | |
|
 | Elprotronic - FlashPro-CC(XS)
Flash Programmer for Texas Instruments Chipcon MCUs (debug port) (XStream 1.0). | ELP-XS-FP-CC
|
call
|
 | Elprotronic - FlashPro-X Flash Programmer
Flash Programmer for all MCUs supported by Elprotronic Inc. (USB-FPA 6.1). | ELP-FLASHPRO-X
|
call
|
 | Elprotronic FlashPro-430(XS)
Flash Programmer for Texas Instruments MSP430 MCUs (XStream-Iso 1.0). | ELP-XS-FP-430
|
call
|
 | Elprotronic FlashPro-ARM-(X2S)
Flash Programmer for Texas Instruments MSP430 MCUs (XStream-Iso 1.0). | ELP-X2S-FP-ARM
|
call
|
| Elprotronic FlashPro-ARM-(XS)
Flash Programmer for Texas Instruments MSP430 MCUs (XStream-Iso 1.0). | ELP-XS-FP-ARM
|
call
|
| Elprotronic FlashPro-ARM-1V(XS)
Flash Programmer for Texas Instruments MSP430 MCUs (XStream-Iso 1.0). | ELP-XS-FP-ARM-1V
|
call
|
| Elprotronic GangPro-430(XS) - 6-channel GANG ISP Programmer
GANG Flash Programmer for Texas Instruments MSP430 MCUs (XStream-Iso 1.0). | ELP-XS-GP-430
|
call
|
 | Elprotronic GangPro-ARM(X2S)
GangPro-CC(XS) XS-GP-CC Gang Programmer for Texas Instruments Chipcon MCUs (debug port) (XStream-Iso 1.0). | ELP-X2S-GP-ARM
|
call
|
 | Elprotronic GangPro-ARM(XS) - USB Flash Gang Programmer for Cortex-M MCUs
Gang Programmer for all ARM MCUs supported by Elprotronic Inc. (XStream-Iso 1.0). | ELP-XS-GP-ARM
|
call
|
 | Elprotronic GangPro-CC(XS)
Gang Programmer for Texas Instruments Chipcon MCUs (debug port) (XStream-Iso 1.0). | ELP-XS-GP-CC
|
call
|
 | EM-32G880F128-H - HEADER BOARD FOR ENERGY MICRO MICROCONTROLLER
Olimex - EM-32G880F128-H - HEADER BOARD FOR ENERGY MICRO EFM32G880F128 CORTEX-M3 MICROCONTROLLER | OLI-EM-32G880F128-H
|
call
|
 | EM-32G880F128-H Energy Micro Header Prototyping Board
EM-32G880F128-H Energy Micro Header Prototyping Board | OLI-EM32G880F128-H
|
call
|
 | EPSILON5 MKIV - Portable high-speed USB In-System (ISP) Programmer OVERVIEW
Epsilon5 MKIV - Portable high-speed In-System (ISP) Programmer with Standalone capability and USB connectivity. Supports AVR, ARM, 8051 & Zensys devices. | EPSILON5MK4(Overview)
|
|
 | EQ-RBK-ZWAVECALIBOX-3 - Z-Wave Calibration System Rev: 3
| EQ-RBK-ZWAVECALIBOX-3
|
call
|
 | Ethernet to Digital IO (DIO) Module - 8 x Digital IO (DIO) Lines
The Brainboxes ED-008 is an Ethernet to Digital IO (DIO) Module featuring 8 Digital Inputs/Outputs. It is designed for use in commercial / light industrial applications. | BRAIN-ED-008
|
call
|
 | FlashPro-CC USB Gang Flash Programmer for the CCx series Chipcon products
USB Flash Programmer for the CCx series Chipcon products from Texas Instruments. | ELP-FlashProCC
|
call
|
 | FlashPro2000 - USB Flash Programmer for TI C2000 Series MCU (TMS320F28xx)
FlashPro2000 - USB Flash Programmer for TI C2000 Series MCU (TMS320F28xx) | ELP-FlashPro2000
|
call
|
 | FlashPro430 - JTAG ISP Programmer for the TI MSP430 Family
The FLASHPRO-430 is a high-speed In-System Programmer for the TI MSP430 family of FLASH microcontrollers. It interfaces to the MSP430 Target Device via JTAG or SBW or BSL and provides high-speed programming of the internal FLASH of the device. The interface to the PC is via USB.
| ELP-USB-MSP430-FPA-STD
|
call
|
 | GangPro-430-JB - USB Gang Flash Programmer for the TI MSP430 series MCU's
Gang Programmer for Texas Instruments MSP430 MCU's (JTAG,SBW,BSL) (USB-FPA 6.1) | ELP-GangPro-430-JB
|
call
|
 | GangPro-CC USB Gang Flash Programmer for the Chipcon CCx series Microcontrollers
Overview product - for details please click on information link. | GangPro-CC-Overview
|
|
 | GangPro430 USB Gang Flash Programmer for the TI MSP430 series Microcontrollers
Includes USB Gangpro430 programming adapter, USB JTAG/BSL cable, CD with software and documentation. | ELP-GangPro430
|
call
|
 | GMB HR84 - grifo® Mini BLOCK - Housing, 8 x Opto-Inputs, 4 x Relay Channels
The GMB HR84 - grifo® Mini BLOCK is a self-contained Control Module Housing, 8 x Opto-Inputs and 4 x Relay Channels. | GRI-GMB-HR84 - Overview
|
|
 | grifo® Mini Modules - Overview
Overview of grifo® Mini Modules | GRI-MINIMOD-Overview
|
|
 | HCS12 Compact Module - Single Board Computer / Datalogger
The S12compact is a Single Board Computer (SBC) based around the Freescale HCS12 microcontroller. The module features the main microcontroller plus a who host of on-board peripherals making it ideal for incorporating into an end product. | |
|
 | ISPalfa1 - Portable ISP Programming System for AVR microcontrollers
The ISPalfa1 is a portable ISP programmer designed for field-service and production In-System Programming (ISP) applications. The programmer supports ISP programming of most Microchip (formerly Atmel) AVR microcontroller devices. | ISPalfa1-AVR-OVERVIEW
|
|
 | ISPnano - Production ISP Programmer family - OVERVIEW
This is an overview page covering the Equinox ISPnano family of Production ISP programmers. | ISPnanoProgrammer Family (Overview)
|
|
 | ISPnano Series 3 - Production ISP Programming Module - OVERVIEW
ISPnano Series 3 - Production ISP Module with USB, RS232 and RS485 connectivity. | ISPnanoS3(Overview)
|
|
 | ISPnano Series 3 ATE - Production ISP Programming Module - OVERVIEW
ISPnano Series 3 ATE - Production ISP Module with relay isolation of all programming signals. Supports USB, RS232 and RS485 connectivity. | ISPnanoS3ATE(Overview)
|
|
 | ISPnano Series 4 ATE - Production ISP Programming Module - OVERVIEW
ISPnano Series 4 ATE - Production ISP Module with plug-in connector modules, relay isolation of all programming signals and opto-isolation of TTL control port. Supports USB, RS232 and RS485 connectivity. | ISPnano-S4ATE(Overview)
|
|
 | ISPnano-GANG Series 3 - multichannel ISP systems - OVERVIEW
ISPnano-GANG Series 3 - multichannel ISP systems - OVERVIEW | ISPnano-S3-GANG(Overview)
|
|
 | Lawicel CANUSB-OEM122 - Special version CANUSB OEM ISO Version 122
Module based on the hardware (circuitry) of the existing CANUSB adapter from Lawicel | LAW-CANUSB-OEM122
|
call
|
 | mbed NXP LPC1768 Cortex-M3 Microcontroller Module with Web-Toolchain OVERVIEW
mbed NXP LPC1768
Cortex-M3 Microcontroller Module with Web-Toolchain
| |
|
 | MIIC-101 - Portable I2C / SMBus Monitor
The MIIC-101 Bus Monitor is a Stand-Alone and Remote Troubleshooting Tool for the I2C (Inter Integrated Circuit) serial bus developed by Philips Semiconductor, or the System Management Bus (SMBus) developed by Intel, and other derived protocols. | |
|
 | MIIC-201 - iPort - Windows to I2C Host Adapter
iPort brings I2C directly to your PC. Just plug iPort into your Windows-based PC's serial port, run our I2C Message Manager or Message Center for Windows applications, and you'll be sending and receiving I2C messages in seconds. | MIIC-201 (see sub products)
|
|
 | MIIC-202 - iPort/AI - RS-232 to I2C Host Adapter with ASCII Interface
iPort/AI brings I2C directly to any computer with an RS-232 serial port. Just plug iPort/AI into your computer's serial port, and you will be sending and receiving I2C messages in seconds. | MIIC-202-xx (xx = select PSU type)
|
|
 | MIIC-207 - i2cStickTM I2C Bus Host Adapter - Overview
The i2cStick is a personal, powerful, and pocket-size I2C Bus host adapter. Just load our free software, plug the i2cStick into a USB port, and you will be sending and receiving I2C messages in seconds. | MIIC-207-Overview
|
|
 | Motorola - HC08 Microcontroller Welcome Kit
Motorola - HC08 Microcontroller Welcome Kit | EL-KIT08
|
call
|
 | Motorola HCS12 credit card sized Controller Module Family (Overview)
Overview of Motorola HCS12 credit card Sized Controller Module Family. | EL-CardS12-Overview
|
|
 | OLIMEX - ARM-USB-OCD
3-IN-1 fast USB ARM JTAG, USB-to-RS232 virtual port and power supply 5-9-12VDC device (supported by OpenOCD open source ARM debugger)
| OLI-ARM-USB-OCD
|
call
|
 | Olimex - LPC-H2138 HEADER BOARD FOR LPC2138 ARM7TDMI-S MICROCONTROLLER
Olimex - LPC-H2138 HEADER BOARD FOR LPC2138 ARM7TDMI-S MICROCONTROLLER | OLI-LPC-H2138
|
call
|
 | Olimex - LPC-H2148 PROTOTYPE HEADER BOARD FOR LPC2148 ARM7TDMI-S MICROCONT
Olimex - LPC-H2148 PROTOTYPE HEADER BOARD FOR LPC2148 ARM7TDMI-S MICROCONTROLLER | OLI-LPC-H2148
|
call
|
 | Olimex - LPC-P2378 DEVELOPMENT PROTOTYPE BOARD WITH LPC2378
Olimex - LPC-P2378 DEVELOPMENT PROTOTYPE BOARD WITH LPC2378 Ethernet, USB, 2x CAN, 2xRS232, ETHERNET, SD/MMC | OLI-LPC-P2378
|
call
|
 | Olimex - SAM3-P256 Header development board for ATSAM3S4BA microcontroller
Olimex - SAM3-P256 Header development board for ATSAM3S4BA microcontroller | OLI-SAM3P256
|
call
|
 | Olimex - SAM7-H256 Header Development Board for AT91SAM7S256 ARM7TDMI-S MC
Olimex - SAM7-H256 Header Development Board for AT91SAM7S256 ARM7TDMI-S Microcontroller | OLI-SAM7H256
|
call
|
| Olimex - SAM7-P256 DEVELOPMENT BOARD FOR AT91SAM7S256 ARM7TDMI-S MC
Olimex - SAM7-P256 DEVELOPMENT BOARD FOR AT91SAM7S256 ARM7TDMI-S MICROCONTROLLER | OLI-SAM7P256
|
call
|
 | Phyton CP12-B1 - In-System Device Programmer
The CPI2-B1 device programmer belongs to the ChipProg-ISP2 family of Phyton in-system production device programmers, designed for use with ATE, ICT, programming fixtures and automated handlers. | PHY-CP12-B1
|
call
|
 | PPM4 MK1(UN) - Production ISP Programming Module - OVERVIEW
PPM4 MK1 - High-speed Production ISP Programming Module for Atmel, NXP and Zensys FLASH Microcontrollers and Serial Memories. Supplied with Universal Mains Power Supply Adaptor suitable for UK, US, Europe and Asia: Input: 110 - 240V AC @ 50Hz, Output: 9V DC reg. @ 1.5A | PPM4-MK1(Overview)
|
|
 | PropRPM - Rapid Prototyping Module for Parallax Propellor Chip
PropRPM - Rapid Prototyping Module for Parallax Propellor Chip | EL-PROPRPM
|
call
|
 | RS232 to RS-485 - Isolated Communications Converter Module
RS-232 to RS-485 - Isolated Communications Converter Module | RS485-C1(xx) - select PSU type
|
|
 | Silicon Labs Z-Wave 500 Series - Overview
This 'Device Library' adds In-System Programming (ISP) support for the Sigma Z-Wave - ZW 500 Series of SoC devices and modules to any Equinox ISPnano production programmer. | Z-Wave 500 Series Overview
|
|
| Sollae CIE-H10A - Ethernet Remote I/O Controller Module with Remote Serial Port
The CIE-H10A is a remote I/O Controller which can monitor digital Input and control digital Outputs over the Internet. It supports Modbus/TCP, HTTP and simple macros for stand-alone operation so that you can use it for various applications. It also features a Serial Port which can be used to control / monitor serial devices remotely over the Internet. | SOL-CIE-H10A
|
call
|
 | Sollae CIE-H12 - Remote I/O Controller
The CIE-H12 is a remote I/O controller which aids monitoring and controlling of 2 x digital inputs and 1 x output remotely over Ethernet (Internet). | SOL-CIE-H12
|
call
|
| Sollae CIE-H12A - Remote I/O Controller
The CIE-H12A is a remote I/O controller which aids monitoring and controlling of 2 x digital inputs and 1 x output remotely over Ethernet (Internet). | SOL-CIE-H12A
|
call
|
| Sollae CIE-H12G - Remote I/O Controller
The CIE-H12G is a remote I/O controller which aids monitoring and controlling of 2 x digital inputs and 1 x output remotely over Ethernet (Internet). | SOL-CIE-H12G
|
call
|
 | Sollae CIE-H14G - 4 Ports Remote I/O Controller
The CIE-H14G is an Ethernet remote I/O controller that has 4 photo coupler input ports and 4 relay output ports for sensors and actuators to monitor and control. | SOL-CIE-H14G
|
call
|
 | Sollae CIE-M10 - Modular I/O Device Server
The CIE-M10 uses Modbus/TCP and HTTP to provide users with ability to control and monitor remote digital output ports and analog/digital input ports | SOL-CIE-M10
|
call
|
 | Sollae CSE-H53 - Serial to Ethernet Converter - Overview
CSE-H53 is a product for manufacturers who want to quickly and easily add Ethernet connectivity in their system. This compact product helps your RS232 system get network connectivity with just serial connection at a reasonable price. | SOL-CSE-H53-Overview
|
|
 | Sollae CSE-H55 - RS-422/485 to Ethernet Converter - Overview
The EZL-CSE-H55 is a network converter for serial devices. It adds network connectivity to RS422/485 devices by processing TCP/IP protocol which is required to send and receive data over the Internet. | SOL-CSE-H55-Overview
|
|
 | Sollae CSE-M53 - Embedded Serial to Ethernet Converter Module - Overview
The CSE-M53 is an Embedded Serial to Ethernet Converter Module. | SOL-CSE-M53-Overview
|
|
 | Sollae CSW-H80 - Serial WLAN Converter
The CSW-H80 is a wireless converter for serial devices. It adds network connectivity to devices by processing TCP/IP protocol which is required to send and receive data over the Internet. PLEASE NOTE - THIS HAS BEEN REPLACED BY CSW-H85K. | SOL-CSW-H80
|
call
|
 | Sollae CSW-H85N / Serial WLAN Device Server
CSW-H85N is a serial to wireless LAN adapter that enables you to add wireless networking capabilities to your industrial equipment via RS232, RS422 and RS485. | SOL-CSW-H85N
|
call
|
 | Sollae CSW-M83 - Serial to WLAN Converter OVERVIEW
The CSW-M83 is a wireless LAN converter for serial devices | SOL-CSW-M83
|
|
 | Sollae CSW-M85 - Serial to WLAN Converter - Overview
The CSW-M85 is a wireless LAN converter for serial devices. | SOL-CSW-M85-Overview
|
|
| Sollae DIN-Rail Adapter Set
| SOL-EZTCP-MNT
|
call
|
 | Sollae EZI-10 - Ethernet Remote I/O Controller
EZI-10 - Remote I/O Controller
The EZI-10 is a remote I/O Controller which is controlled over an Ethernet link. It can be used to monitor a digital Input and control a digital Output over a nework or over the Internet. It supports Modbus/TCP, HTTP and simple macros for stand-alone operation so that you can use it for various applications. | SOL-EZI-10
|
call
|
 | Sollae EZL-200F - Serial to Ethernet Network Converter.
The EZL-200F is a network converter for serial devices. It adds network connectivity to devices by processing TCP/IP protocol which is required to send and receive data over the Internet. | SOL-EZL-200F
|
call
|
 | Sollae EZL-300S - Wireless to Serial Converter
| SOL-EZL-300S
|
call
|
 | Sollae EZL-400S - Serial to Ethernet / Wireless Converter Module
The EZL-400S is a serial to Ethernet or serial to Wireless converter. It adds network connectivity to devices by processing TCP/IP protocol required to send and receive data over the Internet. | SOL-EZL-400S
|
call
|
 | Sollae EZL-410 - 4 Channel Ethernet to Serial Module
The compact EZL-410 is a module for manufacturers who want to embed Ethernet connectivity in their products quickly and easily. It adds network connectivity to devices with a serial interface on its host microcontroller. | SOL-EZL-410
|
call
|
 | Sollae EZL-50L - Ethernet to RS232 Converter
The EZL-50L is a module to embed Ethernet connectivity. It adds network connectivity to devices with a serial interface on its host microcontroller. | SOL-EZL-50L
|
call
|
 | Sollae EZL-60L - Single Channel Ethernet Evaluation Module
The compact EZL-60L is a board-level product for manufacturers who want to embed Ethernet connectivity in their products easily and economically. It adds network connectivity to devices with a serial interface on its host microcontroller. | SOL-EZL-60L
|
call
|
 | Sollae EZL-70 - Ethernet to RS232 / RS422 / RS 485 Converter Module
The EZL-70 is a Ethernet to RS232 / RS422 / RS 485 Converter Module with a RJ45 connector. | SOL-EZL-70
|
call
|
 | Sollae EZL-80C - Wireless Networking Module
The EZL-80c is a wireless networking module that allows embedded wireless connectivity to be added to products easily and economically. | SOL-EZL-80C
|
call
|
 | Sollae WL-618HR - Wireless LAN Card
Wireless LAN card | SOL-WL-618HR
|
call
|
 | STM32-H103 - HEADER BOARD FOR STM32F103RBT6 CORTEX-M3 MICROCONTROLLER
Olimex - STM32-H103 - HEADER BOARD FOR STM32F103RBT6 CORTEX-M3 | OLI-STM32-H103
|
call
|
| STM32-H107-HEADER BOARD FOR STM32F107 CORTEX-M3 MICROCONTROLLER
Olimex - STM32-H107 - HEADER BOARD FOR STM32F107 CORTEX-M3 | OLI-STM32-H107
|
call
|
| STM32-H407 - Development Board for STM32F407ZGT6 CORTEX-M4 microcontroller
STM32-H407 - Development Board for STM32F407ZGT6 CORTEX-M4 microcontroller | OLI-STM32-H407
|
call
|
| STM32-P152 - Prototype Board for STM32L152VBT6 CORTEX-M3 microcontroller
STM32-P152 - Prototype Board for STM32L152VBT6 Low Power CORTEX-M3 microcontroller
| OLI-STM32-P152
|
call
|
| STM32F207 - Prototype board
The STM-P207 is a low-cost entry board for developing custom applications with STM32F207ZET6 Cortex M3 microcontrollers from ST. This board has plenty of RAM, an LCD display and an onboard camera which allows image processing. The Ethernet has a 100MB interface which allows the development of web applications. | OLI-STM32-P207
|
call
|
 | TRP-C06H - Dual port RS-232 to RS-422/485 Isolated Converter
The TRP-C06H allows 2 x RS232 line signals to be bi-directionally converted to RS-422 or RS-485 standard and transmit data up to 1.2km. | TRP-C06H
|
call
|
 | TRP-C24 - 16-channel digital output (Open Collector) isolated RS-485 Module
The TRP-C24 is an isolated output open collector RS-485 module which supports ASCII and Modbus RTU, with 16 digital outputs channels. | TRP-C24
|
call
|
 | TRP-C26 - 16-CH isolated digital input RS-485 module: Supports ASCII and Modbus RTU.
The TRP-C26 provides 16 optical isolated digital input channels. This allows the logic signal to be input from 0 to 30V DC. | TRP-C26
|
call
|
 | TRP-C34 - Ethernet to 4 port RS-232/422/485 Serial Converter
The TRP-C34 is a fast 4-port serial to Ethernet device designed to instantly convert data from RS-232/422/485 interfaces to a 10/100Mbps Ethernet network running at the TCP/IP protocol. | TRP-C34
|
call
|
 | TRP-C39 - Fibre to RS-232/422/485 Isolated converter, ST Multi-mode
The TRP-C39 fibre converter allows RS-232/422/485 signals to be bi-directionally converted to fibre optic and extends the distance up to 2km over multi-mode. | TRP-C39
|
call
|
 | Xeltek - Programming Adaptors - Overview
An overview of the Programming Adaptors supplied by Xeltek for their range of programmers. Adaptors including SOP, SOIC, PLCC, TSOP and BGA adaptors. | XEL-ADAPTORS
|
|
 | XPLAIN - XMEGA AVR Microcontroller - Evaluation Kit
The XPLAIN is a low-cost demonstration board based on the ATxmega128A1 XMEGA AVR microcontroller. It allows for the quick evaluation of the XMEGA microcontroller. | ATAVRXPLAIN
|
call
|
 | Z-Wave500 RT2-S2 - Production ISP Run-Time System
ISPnano Series 4 ATE - Production ISP Run-Time System for Z-Wave 500 Series | Zwave500-RT2-S2
|
call
|
